Nortel Networks 4075 manual Activating Caller filter

Telephone settings

More

Delete all

Select

Yes

4.Press the Up or Down key to highlight any entry.

5.Press the More soft key.

6.Press the Up or Down key to highlight the Delete all option.

7.Press the Select soft key.

8.Press the Yes soft key to confirm the changes.

9.Use the Dialpad to enter the PIN code.

OK

10.Press the OK soft key.

11.Press the Clr key one or more times to return to the idle display.

Activating Caller filter

Attention: If you activate the Caller filter and configure the accept list, the handset accepts calls only from the numbers in the caller filter list. If you configure the block list, the handset blocks all calls from the numbers in the caller filter list.

To activate an accept or block list, perform the following steps:

Caller filter

1.Open the Caller filter menu using the steps in “Accessing the Caller filter menu” (page 192).

196