Nortel Networks 4075 manual Manually selecting the Dect system

DECT system configuration

Save

Save

10.Use the Dialpad to enter the system name.

11.Press the Save soft key.

The Number prompt appears.

12.Use the Dialpad to enter the phone number assigned to your handset.

13.Press the Save soft key.

14.Press the Clr key one or more times to return to the idle display.

You can now use the handset to make and receive calls.

Manually selecting the DECT system

If you subscribe the handset to more than one DECT system, you can manually select which system the handset uses. To manually select a DECT system, perform the following steps:

1.Open the Connectivity menu using the steps in “Accessing the Connectivity menu” (page 46).

2.Press the Up or Down key to highlight the Network select option.

Network select

Select

Select

3.Press the Select soft key.

4.Choose the name of the system from the list.

5.Press the Select soft key.

The name of the currently active system highlights.

6.Press the Clr key one or more times to return to the idle display.

49