Nortel Networks 4075 manual Charging the battery pack

Handset accessories

3. Insert the battery pack into the charger slot as shown in Figure 24.

Attention: Insert the battery pack in the same orientation as it is shown in the figure, otherwise the battery pack cannot charge. When the battery pack is correctly inserted, the indicator lamp lights.

When the battery pack is fully charged, the indicator lamp goes out.

4.Remove the battery pack from the charger, and replace the protective plastic cover over the battery charger slot.

5.Install the battery pack in the handset. See “Removing and installing the battery pack (4075 only)” (page 218) for more information.

Figure 24: Charging the battery pack

221