Telephone settings
2.Press the Up or Down key to highlight the Reset memory card option.
Reset memory card
Select
Yes
3.Press the Select soft key.
4.Press the Yes soft key.
5.Use the Dialpad to enter the current PIN code.
OK
6.Press the OK soft key.
7.Press the Clr key one or more times to return to the idle display.
8.Switch off the handset.
9.Switch on the handset.
Viewing information
Use the status option to view information about the software release installed on the handset, hardware version of the handset, battery charge status, level of radio signal, and available memory.
To view status information, perform the following steps:
1.Open the General settings menu using the steps in “Accessing the General settings menu” (page 150).
2.Press the Up or Down key to highlight the Status option.
Status
Select
3. Press the Select soft key.
165
