DECT system configuration

Register

Select

Empty

Select

Yes

Save

OK

2.Press the Up or Down key to highlight the Register option.

3.Press the Select soft key to start the registration process.

4.Press the Up or Down key to choose one of the following:

If the handset is subscribed to fewer than four systems, choose Empty

OR

If the handset is already subscribed to four systems, choose the name of the system to overwrite.

5.Press the Select soft key, and then press the Yes soft key if you want to overwrite a system.

The PARK prompt appears.

6.Use the Dialpad to enter the PARK code.

Attention: If more than one DECT system overlaps in your location, you are sometimes required to enter a PARK code (system ID). If only one DECT system is available, make no entry, and press the Skip soft key.

7.Press the Save soft key. The PIN prompt appears.

8.Use the Dialpad to enter the PIN (authorisation code).

9.Press the OK soft key.

The Network name prompt appears.

48

Page 48
Image 48
Nortel Networks 4075 manual Select Yes Save