Nortel Networks manual Configuring the LED Indicator 4075 only

Telephone settings

Shortcuts

Select

Select

Select

2.Press the Up or Down key to highlight the Shortcuts option.

3.Press the Select soft key.

4.Press the Up or Down key to highlight the key to which you want to assign a shortcut.

5.Press the Select soft key.

6.Press the Up or Down key to choose the option you want to assign as a shortcut.

7.Press the Select soft key.

8.Press the Clr key one or more times to return to the idle display.

Configuring the LED Indicator (4075 only)

Use the information in this section to configure the LED indicator that appears to the left of the speaker on the DECT 4075 handset. For more information, see “LED indicator (4075 only)” (page 33).

Use the following steps to configure the LED indicator:

1.Open the General settings menu using the steps in “Accessing the General settings menu” (page 150).

2.Press the Up or Down key to highlight the LED signal option.

LED signal

Select

3. Press the Select soft key.

158