Telephone settings
•If you enter a Mandown text message (up to 160 characters in length), the handset sends that message to the configured number.
Attention: You can configure Mandown to send text messages only if your system supports this feature. Contact your system administrator to determine if you can use this feature. After you send a message, the handset stores the message in the text message list. For more information, see “Messaging” (page 106).
Note 1: If you want to cancel the Mandown condition, you must deliberately clear it; the handset does not automatically cancel the Mandown condition if you return the handset to its vertical position.
Note 2: You can configure the LED indicator to flash when the Mandown condition is detected. If you manually clear the mandown condition before the prealarm time elapses, the LED indicator turns off; otherwise the LED indicator continues to flash until the handset places the mandown call or message. See “Configuring the LED Indicator (4075 only)” (page 158) for more details.
Note 3: The Mandown feature is separate from the Emergency Call feature, and you must configure it separately.
CAUTION
The Mandown feature only functions when the handset is in idle mode. If the handset is in any other mode (for example, if you are in a call) the Mandown feature is unavailable.
Activating or deactivating Mandown
To activate or deactivate the Mandown feature, perform the following steps:
1.Open the Calls menu using the steps in “Accessing the call settings menu” (page 188).
201
