Wireless Access Point User Guide
Authentication | Normally, you can leave this at “Automatic”, so that Wireless Stations |
| can use either method ("Open System" or "Shared Key".). |
| If you wish to use a particular method, select the appropriate value - |
| "Open System" or "Shared Key". All Wireless stations must then be set |
| to use the same method. |
|
|
Key Input | Select "Hex" or "ASCII" depending on your input method. (All keys |
| are converted to Hex, ASCII input is only for convenience.) |
|
|
Key Value | Enter the key values you wish to use. The default key, selected by the |
| radio button, is required. The other keys are optional. Other stations |
| must have matching key values. |
|
|
Passphrase | Use this to generate a key or keys, instead of entering them directly. |
| Enter a word or group of printable characters in the Passphrase box |
| and click the "Generate Key" button to automatically configure the |
| WEP Key(s). If encryption strength is set to 64 bit, then each of the |
| four key fields will be populated with key values. If encryption |
| strength is set to 128 bit, then only the selected WEP key field will be |
| given a key value. |
|
|
Radius MAC | The current status is displayed. |
Authentication | Click the "Configure" button to configure this feature if required. |
| |
| See page 21 for details on using Radius MAC authentication. |
|
|
UAM | The current status is displayed. |
| Click the "Configure" button to configure this feature if required. |
| See page 23 for details on using UAM. |
|
|
26
