Paradyne 4200 Dlt-Profile-Trafdsc, 1. DLT-PROFILE-TRAFDSC Command Parameters, Response Format

5. ATM Commands

DLT-PROFILE-TRAFDSC

The DLT-PROFILE-TRAFDSC command deletes a selected ATM Traffic Descriptor profile that is not in use.

Table 5-1. DLT-PROFILE-TRAFDSC Command Parameters

DLT-PROFILE-TRAFDSC:[tid]:trafdsc_profile_id:[ctag][:];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
trafdsc_profile_id	Numeric identifier of a profile (1− 250). Grouping and ranging are
	allowed.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* DLT-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag][:] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* DLT-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag][:] */ aid:ERRCDE=errcde

/* error description */

;

5-2 August 2002 4200-A2-GB20-00