Thermo Products GMD1-60N, GDM1-80N service manual V. Installers Instructions To User

Models: GMD1-60N GDM1-80N

1 44
Download 44 pages 32.82 Kb
Page 27
Image 27

All installations and services must be performed by qualified service personnel.

V. INSTALLER'S INSTRUCTIONS TO USER:

After completing the installation, the installer shall inform and/or demonstrate to the homeowner:

1.The location of all the instructions in the furnace must be kept along with instructions for any accessories in the plastic pouch near the furnace.

2.The location and use of the manual gas shut off valve and furnace electrical disconnect switch. Instruct user to always shut off gas before shutting off electric power.

3.The sequence of operation of the furnace.

4.The correct operation and maintenance of the appliance as outlined in the Users Information section of this manual.

5.That failure to maintain and operate this furnace in accordance with these instructions could result in hazardous conditions, bodily injury, and property damage and may void the limited warranty on the furnace.

6.Review with and encourage the user to read the label reproductions and all warnings and instructions outlined on the front cover and in sections I, II and III of this manual and in the Users Information section of this manual.

7.Recommend the user has a qualified heating contractor inspect the furnace at the start of each heating season. Inform the user of the frequency of inspection required for reach item in the User Information Section of this manual.

8.Should the furnace not operate after installation – note diagnostic code through view port prior to removing door.

26

Page 27
Image 27
Thermo Products GMD1-60N, GDM1-80N service manual V. Installers Instructions To User