All installations and services must be performed by qualified service personnel.
Figure 9
C. INDUCER BLOWER ASSEMBLY
Inspect the pressure switch and tubing connections and inspect the blower/assembly for warpage, deterioration and carbon or other build-up. If necessary, clean the accessible portions of the housing and blower with a damp cloth. Vacuum to remove any lint or dust from the motor assembly.
D. INSPECTING THE VENTING SYSTEM
The venting system should be inspected during the annual maintenance check-up or during each subsequent service call.
Check all vent pipes for restrictions due to soot, or carbon build-up, as well as foreign matter, or any materials, that cause the venting system to restrict the proper venting of combustion products. If a restriction is found, the flue vent must be cleaned or replaced to ensure proper venting.