Manuals / Broilmaster / Outdoor Cooking / Gas Grill

Broilmaster U26SS, DC, U48, PB, PC, AND P48 owner manual Patio Base Post Assembly

Models: AND P48 PB

1 24

Download 24 pages 11.06 Kb

Page 15

Attach the bracket and slide assembly to the factory installed screw located in the bottom of the grill housing. Figure 6.

PATIO BASE POST ASSEMBLY	13

7

Attach the bracket and slide assembly to the factory installed screw located in the bottom of the grill housing. Figure 6.

Loosen the wing nut and move the slide up or down to accept the grease cup. Be sure to trap the rim of the cup as shown.

Use only noncombustible containers for the grease cup (aluminum or tin cans) do not use combustible containers such as Styrofoam or paper cups.

8

Attach the control housing (10) using two #8 x 1/2 screws (11) or two plastic panel fasteners as shown in Figure 7.

FIGURE 6

FIGURE 7

101

11

11

9

Continue assembly as directed by the Owner’s Manual packaged with the grill head.

Image 15

Broilmaster U26SS, DC, U48, PB, PC, AND P48 owner manual Patio Base Post Assembly

Contents

DC, PC, PB, U26, U26SS, U48, AND P48 MODELS CART, POST, AND BASE OWNER’S MANUALRETAIN OWNER’S MANUAL FOR FUTURE REFERENCE THIS GAS ACCESSORY IS DESIGNED FOR OUTDOOR USE ONLY TABLE OF CONTENTS CONGRATULATIONSGrill Information Grill Location CleaningPERIODIC INSPECTION AND MAINTENANCE IMPORTANT INFORMATIONKEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCE INSTALLATION INSTRUCTIONSEMPIRE COMFORT SYSTEMS, INC 918 FREEBURG AVE. BELLEVILLE, IL 62220 PC, DC CART AND PB BASEWORK GLOVES ARE RECOMMENDED TO PREVENT INJURY CART EXPLODED VIEWCART PARTS LIST CART ASSEMBLY Important Completely tighten all screws at this time CART ASSEMBLYAttach the Rear Brace 16 to the Left and Right Side Assemblies with four ˘-20 x 3/4 screws 15. FigureUsing four ˘-20 x 3/4 screws 15, fasten the grill to the cart. Figure CART ASSEMBLYKEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCE INSTALLATIONU26 AND U26SS PATIO BASE POST INSTRUCTIONSPATIO BASE POST PART LIST Note Do not attempt to cut or alter the flex tube in any way PATIO BASE POST ASSEMBLYGRILL BOTTOM PATIO BASE POST ASSEMBLYAttach the bracket and slide assembly to the factory installed screw located in the bottom of the grill housing. Figure PATIO BASE POST ASSEMBLYU48 AND P48 IN-GROUND POST INSTALLATION INSTRUCTIONS KEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCEEMPIRE COMFORT SYSTEMS, INC. 918 FREEBURG AVE. BELLEIVLLE, IL 62220 IN-GROUND POST PARTS DIAGRAM 25-1/4 IN-GROUND POST INSTALLATIONNote Make any adjustments at this time Note Do not attempt to cut or alter the flex tube in any wayIN-GROUND POST INSTALLATION Note See grill Owner’s Manual for location of the grill’s gas valveCompletely fill remaining hole with soil Assemble the grease cup bracket using a #10 Wing Nut. Figure IN-GROUND POST INSTALLATIONPage LIMITED WARRANTY WARRANTYBROILMASTER WARRANTYRETAIN OWNER’S MANUAL FOR FUTURE REFERENCE BROILMASTERFORM NO