Broilmaster DC, U26SS, U48, PB, PC, AND P48 Important Completely tighten all screws at this time

CART ASSEMBLY 7

4

15

FIGURE 4

Attach the Rear Brace (16) to the Left and

16

Right Side Assemblies with four ˘-20 x 3/4 screws (15). Figure 4.

Important: Completely tighten all screws at this time.

FIGURE 5

2

4

15

5

Install one 1/4-20 x 3/4 phillips screw (15) into the factory installed nut on the Left Side Assembly.

Fasten the Cylinder Retainer (4) to the screw with a wing nut (2). Adjust height to accommodate your LP cylinder. Figure 5.

6

FIGURE 6

Slide the flanges of the Control Housing (5) behind the opening. Allow the Control Housing to rest at the bottom of the opening. Figure 6.