Contents
DC, PC, PB, U26, U26SS, U48, AND P48 MODELS
CART, POST, AND BASE OWNER’S MANUAL
RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE
THIS GAS ACCESSORY IS DESIGNED FOR OUTDOOR USE ONLY
TABLE OF CONTENTS
CONGRATULATIONS
Grill Information
PERIODIC INSPECTION AND MAINTENANCE
Cleaning
IMPORTANT INFORMATION
Grill Location
EMPIRE COMFORT SYSTEMS, INC 918 FREEBURG AVE. BELLEVILLE, IL 62220
INSTALLATION INSTRUCTIONS
PC, DC CART AND PB BASE
KEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCE
WORK GLOVES ARE RECOMMENDED TO PREVENT INJURY
CART EXPLODED VIEW
CART PARTS LIST
CART ASSEMBLY
Attach the Rear Brace 16 to the Left and
CART ASSEMBLY
Right Side Assemblies with four ˘-20 x 3/4 screws 15. Figure
Important Completely tighten all screws at this time
Using four ˘-20 x 3/4 screws 15, fasten the grill to the cart. Figure
CART ASSEMBLY
U26 AND U26SS PATIO BASE POST
INSTALLATION
INSTRUCTIONS
KEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCE
PATIO BASE POST PART LIST
Note Do not attempt to cut or alter the flex tube in any way
PATIO BASE POST ASSEMBLY
GRILL BOTTOM
PATIO BASE POST ASSEMBLY
Attach the bracket and slide assembly to the factory installed screw located in the bottom of the grill housing. Figure
PATIO BASE POST ASSEMBLY
U48 AND P48 IN-GROUND POST INSTALLATION INSTRUCTIONS
KEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCE
EMPIRE COMFORT SYSTEMS, INC. 918 FREEBURG AVE. BELLEIVLLE, IL 62220
IN-GROUND POST PARTS DIAGRAM
Note Make any adjustments at this time
IN-GROUND POST INSTALLATION
Note Do not attempt to cut or alter the flex tube in any way
25-1/4
IN-GROUND POST INSTALLATION
Note See grill Owner’s Manual for location of the grill’s gas valve
Completely fill remaining hole with soil
Assemble the grease cup bracket using a #10 Wing Nut. Figure
IN-GROUND POST INSTALLATION
Page
LIMITED WARRANTY
WARRANTY
BROILMASTER
WARRANTY
RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE
BROILMASTER
FORM NO