HP NetRider Introduction, TN3270 Access Server Characteristics, Commands to Manage TN3270 Terminal Emulation

Commands to Manage TN3270 Terminal Emulation

Commands to Manage TN3270 Terminal Emulation

Introduction

This section summarizes the commands to manage 3270 emulation.

Reference

For a complete description of these commands and the correct syntax, refer to the Network Access Server Command Reference.

TN3270 Access Server Characteristics

The following table summarizes the TN3270 commands that configure access server characteristics:

Command Description Default

SET/DEFINE/	Changes the ASCII-
CHANGE TN3270	to- EBCDIC
ATOE	translation for the
	code specified.
SET/DEFINE/	Changes the
CHANGE TN3270	EBCDIC-to-ASCII
ETOA	translation for the
	code specified.

For the default ASCII- to-EBCDIC translation table, refer to the Network Access Server Command Reference.

For the default EBCDIC-to-ASCII translation table, refer to the Network Access Server Commands Reference.

SET/DEFINE/	Creates an access	For the default
CHANGE TN3270	server-wide	KEYMAP, refer to the
TERMINAL	customized TN3270	Network Access Server
	terminal or renames	Command Reference.
	an existing keymap
	for a terminal.
CLEAR/PURGE	Clears dynamic or	None
TN3270 TERMINAL	permanent memory of
	a customized 3270
	terminal.
SET/DEFINE/	Customizes	None
CHANGE TN3270	keymappings for an
KEYMAP	existing access server-
	wide keymap.

Configuring and Managing 3270 Terminal Emulation (TN3270) 18-19