HP NetRider manual SHOW/LIST/MONITOR Port Summary Display Fields, Heading Description

Checking Port Status and Counters

SHOW/LIST/MONITOR PORT SUMMARY Display Fields

The following table describes the information under the headings in the SHOW/LIST/ MONITOR PORT SUMMARY display:

Heading	Description
Port	Number n of the port.
Access	Current setting of the ACCESS port characteristic. Access
	determines how a port can access a service node or how a port
	can be accessed by other interactive users and by service nodes.
	Access is shown by one of the following:
	• Dynamic — Access server allows access to the port to
	alternate between local and remote.
	• Local — Access server allows only interactive use of the
	port.
	• None — Access server prevents any use of the port.
	• Remote — Access server allows only remote connections on
	the port. Port access is specified by using the SET/DEFINE/
	CHANGE PORT command.
Status	Current status of the port, which can be one of the following:
	• Connected — Port is connected to a service.
	• Connecting — Port is attempting a connection to a service.
	• Disconnected — Session was terminated while dormant.
	• Disconnecting — Session is disconnecting from a service.
	• Idle — Port is not in use.
	• Local Mode — Port is logged in to the access server and is
	not connected to or connecting to a service.
	• Locked — LOCK command was executed on the port.
	• Permanent — Status that appears for the LIST command.
	• Signal Wait — The port failed to assert the DSR signal
	during a signal check controlled connection attempt.
Services	The local services that the access server offers on the port. Host-
Offered	initiated requests can be made for these services.

17-30 Managing the Access Server