Ddp

		Displaying AppleTalk Counters

Field		Description

	Unsent Responses	The number of AARP responses that
		could not be sent due to insufficient
		access server resources.
DDP	In Receives	The number of DDP datagrams the
		access server has received, including
		those received in error.
	Out Requests	The number of DDP datagrams DDP
		sent out on behalf of access server
		AppleTalk components.
	In Local Datagrams	The number of DDP datagrams the
		access server has received that were
		destined for the access server.
	Forwarded Requests	The number of DDP datagrams the
		access server received for which this
		was not their final destination. DDP
		made an attempt to forward these
		packets.
	Too Short Errors	The number of DDP datagrams dropped
		because their data length was less than
		the length specified in the DDP header
		or because their length was less than
		that of a DDP header.
	Too Long Errors	The number of DDP datagrams dropped
		because their data length exceeded the
		length specified in the DDP header or
		because their length was greater than
		the maximum DDP length.
	No Protocol Handlers	The number of DDP datagrams the
		access server received that were
		addressed to an upper layer protocol
		that the access server does not support.
	Checksum Errors	The number of input DDP datagrams
		dropped because of a checksum error.
	Short DDP Errors	The number of input DDP datagrams
		dropped because access server was not
		final destination and type was short
		DDP.

Managing AppleTalk 8-7

Page 149

Image 149

Contents

Software and Version Revision/Update Information Digital Equipment Corporation 199 7. All rights reserved Contents User Interface Managing Load Hosts Configuring LAT Characteristics Vii TCP/IP Network Characteristics Managing AppleTalk Configuring Basic Device Characteristics Configuring Modem Signals Configuring and Managing Interactive Devices Xiii Configuring and Managing LAT Services Configuring LPD Printers Configuring and Managing Slip Ports Configuring for Snmp Access Configuring and Managing 3270 Terminal Emulation TN3270 Configuring and Managing Point-to-Point Protocol PPP Ports Managing IPX Managing Dial Services Managing Access Server Security Xxiii Accounting Glossary Index Page Preface Using This ManualOverview Purpose Convention Meaning ConventionsUppercase Text Associated Documents Digital Equipment Corporation How to Order Additional DocumentationTo Order Contact Correspondence Online ServicesDocumentation Comments FAXPage This Chapter Chapter Dnas ManagementIntroduction Configuration Tasks Configuration Tasks for System AdministratorsTo Configure Refer to Default Settings To Manage Refer to Management Tasks for System AdministratorsSystem Management Tasks Local Help Tutorial Accessing Online HelpUser Tasks Memory Types Storage of Configuration Settings and Changes in MemoryPower Loss Types of Commands That Operate on Configuration Settings Commands to Display and Change Configuration SettingsReference Nvram Chapter Management Tools Command Provides Access to Commands to Enable Level Disable Access Server CommandsLevels of Access Server Commands User Groups Command DefinitionsCommand Result Example Enabling Privileged Commands Privileged CommandsExample Changing the Privileged Password Local SET Server Privileged Password Help Command Help Tutorial CommandExample Accessing Online Help Information Help Console Port Example Show Server CommandDisplaying Port Parameters Local Show Server Remote Console Port Features of the Remote Console PortDescription Communications Utilities for Remote Console Sessions Usage Considerations Network Control Program NCPOpenVMS Utility Terminal Server Manager Use of SET HOST/MOP from a DECnet/OSI OpenVMS Node $ MCR NCP NCP Connect Node Shrimp Service Password Fedcba Badcfe Use of CCR from an Ultrix DECnet Node Telnet Remote Console CharacteristicDescription Characteristics of the Telnet Remote Console Port Related Information Access Server ManagerFunctions Page Chapter User Interface Command Groups and Menus Creating a Command Group Using Command GroupsExample Defining a Command Group Step Action Purging a Command Group Executing a Command GroupDisplaying a Command Group Displaying a List of Enabled Menus Using MenusEntering Menu Mode Example Show Menu Command Example Assigning a Default Menu Assigning a Default Menu to a PortLocal Define Port 2 Default Menu Hosts Menu Windows Figure Windows on Access Server Menus Main Menu Local Change Menu Services from MainDefining Menus Defining Menu Choices Main Menu Display Example Sample Definition of a Menu Selection Displaying a Selected Menu Exiting from a Menu Using Menus to Set Up a Captive PortDisplaying a Menu Definition Example Displaying a Menu Definition Local Purge Menu Main Line Local Purge Menu Hosts Example Commands to Purge Entire Menus and Menu LinesPurging Menu Lines and Entire Menus Chapter Managing Load Hosts ∙ DSV$CONFIGURE ∙ Dsvconfig Load Host Procedures Defining Symbols Backward Compatibility of DSV$CONFIGUREExecuting DSV$CONFIGURE Example Starting DSV$CONFIGURE and Displaying Help ADD CommandCommand Description Component Server Example DSV$CONFIGURE ADD Command Modify and SET CommandsDelete Command Connect and USE Commands List and Show CommandsExample Delete Command for DSV$CONFIGURE Example List Command for DSV$CONFIGURE Local CTRL/D Local Show User Context-Sensitive Help for DSV$CONFIGURE Dsvconfig Menu DECserver Configuration Procedure IP Address Configuration Via Bootp Using a BOOTP/TFTP Server Remote Connection Password Upline Dumps with MOP Hosts Upline Dumps with BOOTP/TFTP HostsUpline Dumping For TSM Users Terminal Server Manager TSMPage Chapter Initializing the Access Server Do This Preparing LAT Services for Initialization Preparing Telnet Listeners for Initialization Disabled Using the Initialize Command Initializing the Access ServerDefault Mode for the Initialize Command Login Methods Specifying a Delay Value with Initialize Specifying an Image Name When InitializingSpecifying Initialization from a Load Host Updating Flash RAM Specifying the Disable Option with Initialize Using the Diagnose Option with InitializeInitialize Diagnose Option Tests Test Performs NCP Initialization Commands Using NCP to Initialize the Access ServerNCP Initialization Description Commands NCP Reference Determining Boot Protocols Booting from the NetworkLoading the Software Image Reference Procedure Booting Using Console Commands Option Definition Associated Options Boot Command Options Option Definition Associated Options Page Chapter Configuring LAT Characteristics Preparing to Change LAT Characteristics LAT CharacteristicsLAT Characteristic Summary Characteristic Default Range Refer to Section Disabled Service Groups EnabledPasscheck Queue Limit LAT Characteristics Display Example Displaying LAT CharacteristicsCommand To Use Configure Announcements Example Announcements Characteristic Changing the Circuit Timer Circuit Timer CharacteristicIncreasing the Circuit Timer Decreasing the Circuit Timer Identification String in a Login Procedure Display Identification CharacteristicChanging the Server Identification String Removing an Identification String Keepalive Timer Default Values Keepalive Timer CharacteristicKeepalive Timer Example Local Change Server Keepalive Multicast Timer Default Values Multicast Timer CharacteristicChanging Multicast Timer Values Example Local Change Server Multicast Timer Default Access Server Name Access Server Name CharacteristicChanging the Access Server Name Local Change Server Name Printing Local Change Server Node Limit Node Limit CharacteristicChanging the Access Server Node Limit Access Server Number Values Access Server Number CharacteristicChanging the Access Server Number Local Change Server Number Changing the Passcheck Characteristics Passcheck CharacteristicPasscheck Characteristic Example Local Change Server Passcheck Enabled Special Queue Limit Values Queue Limit CharacteristicChanging the Queue Limit Local Change Server Queue Limit None Changing the Retransmit Limit Characteristic Retransmit Limit CharacteristicRetransmit Limit Values Local Change Server Retransmit Limit Access Server Mapping Responder CharacteristicDatagram Types Datagram Name Description Local Change Server Responder Enabled Changing the Responder Characteristic Viewing Service Groups Service GroupsChanging Access Server Service Groups Changing Service Groups Examples Chapter TCP/IP Network Characteristics TCP/IP Network Characteristics Setting the Internet Address Configuring the Internet Address and Subnet MaskTasks Alternative Learning IP Information Internet Address Class Default Subnet Mask Setting an Internet Subnet Mask Configuring the Internet Address and Subnet Mask Local Show Internet Displaying the Internet Address and Subnet MaskInternet Address and Subnet Mask Display Example Displaying DNS Characteristics Configuring Domain Name System DNS CharacteristicsLocal Show Internet Name Resolution Internet DNS Character Display Example DNS Field Description DNS Counter Display Example Local Show Internet Name Resolution CountersDisplaying the DNS Counters Configuring and Using Default Name Resolution Domain Example Configuring the Default Name Resolution Domain Local Connect SALES.REVENUE Using Trailing Dots Name Resolution Modes Changing the Name Resolution ModeChanging the Time Limit Changing the Retry Limit Configuring a List of Internet Name Servers Configuring a List of Commonly Used Internet HostsIf Using a Name Server Configuring a Root Name Server Name Resolution and Gateways Configuring a Name Server for a Different Domain Pass Description Assigning DNS Server Addresses Automatically Configuring a Default Gateway Configuring a List of Internet Gateway AddressesDefault Gateway Definition Example Displaying a List of Gateway Addresses Defining Subnets Available Through a Specific Gateway Defining Networks Available Through a Specific GatewayDefining Hosts Available Through a Specific Gateway Subnet Definition Through a Specific Gateway Example Displaying the List of Internet ARP Entries Configuring a List of Internet ARP EntriesDefining an ARP Entry Sample List of Internet ARP Entries What the Timer Does Setting the TCP Keepalive TimerSetting the Timer Disabling the Timer Timer Characteristics Display Displaying Timer CharacteristicsRetry Set Example Local Change Internet TCP Keepalive Retry Displaying the Internet Counters Using the Show CommandInternet Counters Display Example Local Show Internet Counters Bytes Data Retransmitted Total number Internet Counter Display Fields Field Description 24 TCP/IP Network Characteristics Learning Operation Learning IP Information From a Bootp ServerBootp Server Configuration Local Define Internet Enabled Setting Up IP Configuration LearningLocal List Internet Local Define Internet Address None Learning IP Information From a Dhcp Server Bootp and Dhcp DifferencesUsing a Bootp Server Using a Dhcp Server Dhcp Client Operation IP Address Assignment Dhcp Proxy Operation Configuring Default Values Displaying the Dhcp SettingTo Do This Use This Command Enabling and Disabling Dhcp Assigning Wins Server Addresses What Is Wins Autoconfigure?What Does Wins Do? Operation Assigning Wins Addresses Displaying Wins CharacteristicsWins Address Example Wins Display Example Field Description Page Chapter Managing AppleTalk Overview Local Define Appletalk Enabled Configuring AppleTalk on an Access ServerAppleTalk Address Format Enabling AppleTalk Local Define Appletalk Disabled Setting AppleTalk Address Cache SizeDisabling AppleTalk Local Define Appletalk address Cache size n Configuring AppleTalk on an Access Server Commands Displaying AppleTalk CharacteristicsDisplaying AppleTalk Characteristics Example Fields in the AppleTalk Characteristics Display Displaying AppleTalk Counters CommandDisplaying AppleTalk Counters Example Fields in the AppleTalk Counters Display DDP ZIP NBPRtmp Aarp Values Displaying AppleTalk Status Example Displaying AppleTalk StatusFields in the AppleTalk Status Display Field Value Description AppleTalk is fully operational Displaying AppleTalk Routes Example Displaying AppleTalk RoutesFields in the AppleTalk Routes Display Local Show Appletalk Routes Field Value Description Displaying AppleTalk ARP Entries Example Displaying AppleTalk ARP EntriesFields in the AppleTalk ARP Display Local Show Appletalk ARP Entries Field Value Description Page Chapter Configuring Basic Device Characteristics Characteristic Default Allowed Refer to Values Section Configuring Basic Device CharacteristicsBasic Device Characteristic Summary Logout Longbreak Output Flow LongbreakParity Speed Local Show Port Displaying Basic Device CharacteristicsDisplaying Port Characteristics Example Defining the Access Characteristic Example Configuring the Access CharacteristicCharacteristic Device Type Examples Local Define Port 5 Access Remote Setting For These Devices Matching the Port and Device CharacteristicsAutobaud Settings Character Size Parity Setting Check Performed Per Character Example Changing the Port Speed Example Changing the Parity SettingsExample Setting the Stop Bits for a Device Device Type Applies to Device TypesExample Changing the device Type Local Change Port 5 Type Hardcopy When to Use Configuring the Flow Control CharacteristicFlow Control Types ∙ XON/XOFF ∙ DSR ∙ CTS Example Enabling CTS Flow Control Example Enabling XON/XOFF Flow ControlExample Enabling DSR Flow Control Example Disabling Flow Control Flow Control DirectionExample Enabling Input Flow Control Example Enabling output Flow Control Specifying Dsrlogout Specifying the Automatic Logout CharacteristicsSpecifying Longbreak Logout Example Enabling Dsrlogout Example Changing the Inactivity Timeout Period Specifying the Inactivity TimerSpecifying Inactivity Logout Example Enabling Inactivity Logout Chapter Configuring Modem Signals Port Configuration DTE/DCE Device Configuration Access Servers and Modem Control Determining the Supported Modem SignalsAccess Server Types and Supported Modem Signals Network Access Server Modem Signals Supported Type Set Modem Signal Description Modem Signals DescriptionTypes of Modem Signal Dsrs Computer Interface Specifying Modem Control and Signal ControlLogging Out the Port with Dsrlogout or Longbreak Logout Example Enabling Modem Control Example Enabling Signal ControlLocal Define Port 5 Modem Control Enabled Local Logout Port Example Enabling Signal Select Specifying Signal SelectDetermining When to Use a Signal Set Local Change Port 7 Signal Check Enabled Specifying Signal CheckExample Enabling Signal Check Enabling Dtrwait Example Local Change Port 3 Dtrwait EnabledSpecifying Dtrwait Specifying Ring Specifying Alternate Speed Specifying Dialup Configuring a Dial-In Modem on a Full Modem Control Server Sample Modem ConfigurationsConfiguring a Dial-In Modem on a Modem Control Server Modem Control Configuring a Dial-Out Modem on a Full Modem Control Server Configuring a Dial-Out Modem on a Modem Control Server Establishing a Connection Modem Control Sequences Response to Momentary Loss of CTS Disconnecting Port Characteristic Effects on the DTR and DSR Signals Configuring DTR and DSR SignalsEnabled Characteristic DTR and DSR Actions Signal Control Dtrwait Check Dsrlogout Signal ControlSignal CHECK, Dtrwait For More Information Chapter ∙ Managing Users ∙ Managing Sessions Configuring an Interactive Device for LAT Sessions Configuring an Interactive Device for LAT Sessions Configuring LAT Group Codes for Interactive Devices Sample Network Configuration Example Enabling Autoconnect Local Change Port 5 Autoconnect EnabledSpecifying Autoconnect Local Change Port 5 Autoprompt Disabled Specifying the Default ProtocolSpecifying Autoprompt Example Disabling Autoprompt Specifying Failover Configuring Port QueuingExample Disabling Port Failover Example Enabling Queuing on a Port Option Displays Entries For Displaying Access Server Queue Entries Show Queue ALL Display Example Removing Entries from the Access Server QueueEffect on the Queue Example Remove Queue Local Change Port 5 Remote Modification Enabled Configuring Port Characteristics Configuring a Device on Port 6 for Internet Hosts Example Configuring an Interactive Device for Telnet Sessions Reference How to Configure Configuring a Session Management TD/SMP TerminalLocal Change Port 2 Multisessions Enabled Benefits and Restrictions Summary Command Descriptions Local Mode Command Restrictions During Session Management Logging In with Multisessions On-Demand Loading Configuration Example Configuring On-Demand Loading for Asian TerminalsDisable Switch Character Local Change Port 5 ON-DEMAND Loading Enabled Buffer Size Configuring for Block-Mode Terminals Profiles Types Profile CharacteristicsSpecifying the Telnet Client Session Profile Profiles Session Character Binary Characteristics Characters Terminal Type Switch Specifying Echo Characteristics Modifying Telnet Session CharacteristicsSpecifying the Binary Characteristic Example Specifying Echo Characteristics Mapping Keyboard Characters to Telnet Functions Specifying Character Size Local Change Port 5 Telnet Client AO None Function Description DefaultTelnet Keymapping Functions Specifying Autosynch Specifying AutoflushSpecifying Telnet Client Newline Example Disabling Autoflush Specifying Flow Control Local Change Port 5 Telnet Client Flow Control DisabledExample Specifying Telnet Client Newline Examples Enabling Flow Control Specifying Message Verification Specifying the Switch CharacterExample Configuring Message Verification Specifying a Preferred Terminal Type Example Configuring Switch CharacterExample Specifying Terminal Type Local Change Port Telenet Client Terminal VT321 Optional Setup for Local User Accounts Managing Access Server User AccountsMinimal Setup for Local User Accounts SHOW/LIST/MONITOR Useraccount Display Authorization Profile Information Service Permissions Access Service Types and Access LevelsService Type Description Service Type User Access Command Description Variables Comments Clause User Account Command Parameters Variable Definition Access Command Variables Managing Users Providing a Contact Name and Access Server LocationSpecifying Preferred Service for LAT or Telnet Resources Examples Configuring Port Username Example Enabling a Preferred Telnet ServiceSpecifying the Port Username For the Telnet Protocol Local Change Port 5 Forward Switch F Backward Switch B Specifying Keys to Switch Between SessionsExample Defining Keys as Switches Defining the Break Key Specifying a Key to Switch to Local Mode Example Disabling a Local Switch Example Configuring a Key as a SwitchSpecifying Broadcast Example Disabling Broadcast Messages Example Disabling Loss Notification Specifying Loss NotificationExample Broadcast ALL Specifying Verification Specifying Message CodesSpecifying Lock Example Disabling Verification Displaying Information About the Users Example Configuring LockExample Show Users Display Local Show Users Heading Description Specifying User GroupsSHOW/LIST/MONITOR Users Display Headings Local SET Port Groups Example Assigning User Groups Example Initiating a Session to a LAT Service Initiating a Session to a LAT ServiceManaging Sessions Initiating a Session to an Internet Host Example Initiating a Session with an Internet Host Sending Telnet Functions to a Remote Telnet ServerLocal Open Sales Local Telnet Sales Local Send Telnet AO Example Changing the Server Session Limit Controlling the Number of SessionsLocal Change Server Session Limit Local Change Port 5 Session Limit Local Show Sessions Port 1,2 Displaying Session InformationExample Show Sessions Display SHOW/MONITOR Sessions Display Fields Local Show Port 4 Sessions 1 Characteristics Displaying Session CharacteristicsDisplaying Session Status Local Show Port 14 Session 1 Status SHOW/MONITOR Port Sessions Status Display Fields Flow Control commands to enable Terminating Sessions Page Prerequisites Chapter Configuring and Managing LAT Services Configuration Parameters Configuring a Port to Offer a LAT Service Enabling Announcements Configuring Access to a LAT ServiceAssigning a Service Name Assigning a Port Name Assigning an Identification StringExample Clearing the Identification String Port Naming Guidelines Password Limit Specifying the Service PasswordExample Assigning a Service Password Example Clearing the Service Password Example Configuring a PC As a Terminal and LAT Service Configuration of Specific Types of Devices As LAT Services Local Define Port 2 Dedicated None Dialup Enabled Dsrlogout Configuring a Computer As a LAT ServiceExample Configuring a Computer As a LAT Service on Port Example Configuring a Dial-In and Dial-Out Modem Configuring a Modem As a LAT Service Setting Up a LAT Remote Print Queue on an OpenVMS Host Configuring a Printer As a LAT ServiceExample Configuring a Printer As a LAT Service on Port Privileges for Running Latcp Configuring a Logical Device to Connect a Specific Port Creating a Logical Device to Access a Printer ServiceUsing a Remote Printer Command File LTLOAD.COM Setting Up a LAT Remote Print Queue on an Ultrix System Configuration of Specific Types of Devices As LAT Services Configuring a Printer with Unannounced Availability Configuring a Printer with Unannounced Availability More Examples Problem Solving Verifying the LAT ServiceExample Verifying the LAT Service Local Connect LAT Adevice Destination PORT5 Displaying Services Characteristics Displaying Information About a Service Local Show Service Printer Characteristics Example Show Service Characteristics DisplaySHOW/LIST/MONITOR Service Characteristics Display Fields Displaying Services Status Local Show Service Develop Status Example Show Service Status DisplaySHOW/LIST/MONITOR Service Status Display Headings Displaying Services Summary Local Show Services ALL Summary Example Show Service Summary DisplaySHOW/LIST/MONITOR Service Summary Display Headings Page Chapter Configuring and Managing Telnet Servers Configuring a Printer for Access Through a Telnet Listener Sample Device ConfigurationsLocal Define Port 4 Access Remote Autobaud Disabled Break Local Define Port 4 Dedicated None Dsrlogout Disabled Flow Configuring a Modem for Access Through a Telnet Listener Configuring a Computer for Access Through a Telnet ListenerSample Device Configurations Example Configuring a Dial-Out Modem 890-1234 Local Change Telnet Switching Modes Sample ConfigurationConfiguring Personal Computer Access to a Printer Local Change Port 5 Interrupts Enabled Break Local Setting User Priority for Devices Using Dynamic Access Partner Guidelines Configuring a File Transfer Partner Configuring a TCP/IP Remote Print Queue on an Ultrix System Configuring a Remote Print QueuePrinter Port Telnet Server Characteristics Characteristic Setting # lprsetup Configuring a TCP/IP Remote Print Queue on a Unix System Configuring a Telnet Listener Mapping Event Indications to Keyboard Characters Configuring Telnet Server Session CharacteristicsEvent Indications Event Indication Description Local Change Port 5 Telnet Server Character Specifying Newline Characteristics Local Change Port 5 Telnet Server Transmit Character Size Example Setting Character Size in a Specific Direction Displaying Telnet Server Characteristics Managing Your Access Server As a Telnet Listener NodeExample Show Port Telnet Server Characteristics Display Displaying Telnet Listeners Example Removing a Telnet Listener Removing a Telnet ListenerRemoving One of Many Devices Assigned to a Telnet Listener Reassigning a Port Example TCP Messages to Poll Client User Location Data Supplying User Location Data to Telnet Servers When To Use Raw TCP Configuring a Raw TCP ListenerConfiguring Raw TCP Example Configuring Raw TCP Example Raw TCP Display Displaying Raw TCP Characteristics Chapter Configuring LPD Printers Supported File Types LPD OperationControl and Data Files This File Contains LPD Operation Operation Configuring Remote Hosts Configuring LPDAssociating a Printer With a Port If Printing From Then This Host Characteristic Description Setting Port Characteristics Displaying Printer Characteristics Printer Configuration ExamplePrinter Display Example Local Show Printer ALL Speedy Local Show Printer Speedy Status Chapter Configuring and Managing Slip Ports Configuring and Managing Slip Ports Packet Forwarding to and from Slip Hosts Network Configuration Containing Slip Hosts Local Show Port 5 Slip Characteristics Displaying Slip CharacteristicsDisplaying Slip Characteristics Example Assigning a Host Internet Address Managing Internet Addresses for Slip HostsRadius Specified Slip Host Address Local Change Port Slip Host Address How a Port Automatically Obtains the Slip Host Address Changing the MTU Managing the Maximum Transmission UnitRelationship of the TCP Maximum Segment Size and the MTU Fragmentation Define Port Default Protocol Slip Dsrlogout Enabled Example Configuring a PC As a Terminal and Slip Host Configuring a Device As a Dedicated Slip Host Configuring a Dedicated Slip Port Configuring a Dial-In Modem for Use with a Slip Host Prerequisites Establishing Terminal Sessions with a PC After Making a Connection Establishing a Slip SessionEnabling a Slip Session from the PC Enabling Cslip Compressed SlipDisabling Cslip Automatic Cslip Show Port Slip Counters Display Displaying Slip CountersSlip Counters Display Fields Local Show Port 5 Slip Counters Disabling Slip Disable Slip ExampleLocal Change Port 2 Slip Disabled Page Chapter Configuring for Snmp Access Supported Specifications Supported Snmp FeaturesSnmp Community Names Supported Snmp Operations MIB Description Supported MIBsSupported MIB Variables Supported Management Information Base Variables Default Community Name Public Configuring the Access Server for Snmp AccessEnabling and Disabling Snmp Displaying Information About Snmp Configuring a Community Name with an Address Configuring a Community Name for Access by Any NMSExample Configuring Community Names for Access by Any NMS One IP Address for a Community Name This Event Occurs When Configuring Community Names to Send Trap MessagesExample Configuring Snmp Trap Messages Local Clear Snmp Community Server Trap Disabled Sample Snmp ConfigurationDisabling Trap Messages for a Community Name Removing Community Names Example Removing the Community Name Internet Address Removing an Address from a Community NameLocal Clear Snmp Community Bugs Local Change Snmp Community Server Address ANY Configuring the NMS Chapter Managing the Access Server Distributing Devices on Access Servers Managing Your Access Server As Part of the LAT NetworkControlling the Number of Known Service Nodes Checking LAT Service Accessibility Viewing LAT Node Status Information Reducing Memory UsageExample Show Node Status Display Local Show Node Peach Status SHOW/LIST/MONITOR Node Status Display Fields Viewing LAT Node Counters Information Local Show Node Peach Counters Example SHOW/LIST/MONITOR Node Counters DisplayTSHOW/LIST/MONITOR Node Counters Display Fields Field Description Ports with Limited View Viewing LAT Node Summary Information Local Show Node ALL Summary Example Node Summary DisplayNode Summary Display Fields Displaying Access Server Counters Displaying Information About the Access ServerSpecifying the Prompt Local Change Server Prompt Engineering SHOW/LIST/MONITOR Server Counters Display Fields Example Show Server Counters DisplayEthernet Data Link Counters Local Show Server Counters Field Description Field Description Field Description LAT protocol Counters Local Show Server Status Displaying Access Server StatusExample Show Server Status Display MOP Field Description Memory used for storing service and node Field Description Field Description Displaying Access Server Summary Information Local Show Server Summary Example Show Server Summary DisplaySHOW/LIST/MONITOR Server Summary Display Fields Checking Port Status and Counters Displaying Port Characteristics Displaying Port Counters Example Show Port Characteristics DisplayLocal Show Port 1 Characteristics Local Show Port 1 Counters Example Show Port Counters DisplaySHOW/MONITOR Port Counters Display Fields Example Show Port Status Display Displaying Port StatusSHOW/MONITOR Port Status Display Fields Local Show Port 1 Status Field Description Local Show Ports ALL Summary Displaying Port SummaryExample Show Port Summary Display SHOW/LIST/MONITOR Port Summary Display Fields Configuring and Managing 3270 Terminal Emulation TN3270 Definition Supported Ascii Terminals Server-Specific Keyboard Maps Definition and Description of a Keyboard MapKeyboards Setting Up an Ascii Terminal Configuring Basic 3270 Terminal Emulation Terminal Model Setup Parameters Terminal Setup ParametersIndicating the 3270 Model Number Specifying the Type of Ascii Terminal Used for Emulation Status Line Indicator Connecting to an IBM HostIBM Host Communications Entering and Editing Data Message Description Status Line Messages Status Line Indicator Display Displaying and Customizing Keyboard Maps Default Server-Wide Terminal Types and Keyboard MapsServer-Wide Keyboard Maps Customization Local Show TN3270 Terminal Predefined Terminal Type Default Keyboard Map Default Server-Wide Terminal Type and Keyboard MapsDefining New Server-Wide Terminal Types and Keyboard Maps Local Show TN3270 Keymap VT220 Rules for Customizing Keyboard Maps Customizing Server-Wide Keyboard MapsLocal Change TN3270 Terminal PC100DCA Keymap Newkeys Local Change TN3270 Keymap Newkeys Clear CTRL/W Local Show TN3270 Terminal Keyboard Map and Terminal Type Selecting and Customizing Keyboard Maps for a PortPredefined Terminal Device Associated Keyboard Map VT100, Ansi Local Change Port TN3270 Keymap Newline Ctrl/J Customizing a Default Keyboard Map for a PortLocal Change Port 2 TN3270 Terminal VT420 Following example shows a partial display of a keymap Example Show Port TN3270 Keymap Command ASCII-to-EBCDIC and EBCDIC-to-ASCII Translation Tables Command Enables You to Display and ModifySHOW/SET TN3270 Atoe SHOW/SET TN3270 Etoa Command Frees Nvram Space Used By TN3270 Commands That Free Nvram SpaceGuidelines for Managing the Use of Nvram for TN3270 Storage Requirements for TN3270 Definitions in Nvram Local Define Port TN3270 Nvram Limit Limiting Nvram Usage Command Description Default Commands to Manage TN3270 Terminal EmulationTN3270 Access Server Characteristics Description Default TN3270 Port Characteristics Displays Show CommandsPage Configuring and Managing Point-to-Point Protocol PPP Ports Example Enabling PPP for Mixed Traffic Enabling PPP on an Access Server PortEnabling PPP for Mixed Traffic Enabling Ports with Modems for PPP Enabling Dedicated PPP Traffic Local Connect PPP Using the Connect PPP CommandEstablishing and Ending a PPP Session Displaying LCP Characteristics Displaying PPP CharacteristicsExample Displaying LCP Characteristics Local Show Port 5 PPP LCP Characteristics Field Description Values Default Fields in the LCP Characteristics Display Displaying Ipcp Characteristics Ipcp Example Ipcp Characteristics DisplayIpcp Characteristics Display Fields Field Description Values Default Example Atcp Characteristics Display Atcp CharacteristicsAtcp Characteristics Display Field Values Local Show Port 5 PPP Atcp Characteristics Field Description Values Default Displaying LCP Status Displaying PPP StatusExample LCP Status Display Local Show Port 5 PPP LCP Status Fields in the LCP Status Display Example Ipcp Status Display Displaying Ipcp Status Fields in the Ipcp Status Display Local Show Port 5 PPP Atcp Status Displaying Atcp StatusExample Atcp Status Display Fields in the Atcp Status Display Displaying PPP Counters Example Commands to Display LCP CountersDisplaying LCP Counters Local Show Port 5 LCP Counters Fields in the LCP Counters Display Displaying Ipcp Counters Local Show Port 5 Ipcp Counters Example Command to Display the Ipcp CountersFields in the Ipcp Counters Display Displaying Atcp Counters Local Show Port 5 Atcp Counters Example Command to Display the Atcp CountersFields in the Atcp Counters Display Field Description Chapter Managing IPX IPX Description Access Server Configuration Login Procedures Getting Started Checklist Software Requirements Hardware and Software RequirementsHardware Requirements References PC Remote Access Software Setting Up Your PCNovell Workstation Software Novell Utilities for Local Execution Configuring the Port for an Attached Device Setting Up the Network Access ServerLocal Change IPX Internal ipx-net Local Change IPX Enabled Enabling IPX Activating PPP Configuring the Port for the Login MethodConfiguring the Port for Login to the Local Prompt Enabling PPP/PAP Password Authentication Configuring the Port Dedicated to PPPConfiguring the Port for PPP/IPXCP Data Link Local Change Port n LCP Authentication Disable Disabling PPP/PAP Password AuthenticationPasswords Port PPP IPX Commands for LCP Summary of DECserver IPX Management CommandsPort n LCP SHOW/MONITOR Port n Description Port PPP Commands for PPP Negotiation Status Port PPP IPX Commands for IpxcpPort n Ipxcp Display the values of the Ipxcp counters Display the values of the PPP counters Server IPX CommandsCharacteristics Learn SNAP802 Dial-Out PC Modems Modem ConsiderationsDial-In Modems Recommended Serial Port Baud Rate Novell Operation Novell Client/Server Operation Novell Client/Server Operation Operational Checkout and Diagnosis Verifying Configuration Disabling IPX Using the Define CommandLocal Define IPX Disabled Standard Ethernet Frame TypesRAW802 SAP802 IPX Characteristics Display Displaying IPX CharacteristicsIPX Characteristics Display Fields Local Show IPX Characteristics Field Description Displaying IPX Status Using the Show IPX CommandIPX Status Display Fields in the IPX Status Display Displaying IPX Counters Use the Show IPX Counters commandIPX Counters Display IPX Counters Display Fields Field Description Field Description Displaying IPX Routes Using the Show IPX Routes CommandIPX Routes Display IPX Routes Display Fields Using the Zero Command Resetting CountersZero Command Options Option DescriptionPage Chapter Managing Dial Services Entering the SET Privileged command Dial Services Command GroupsCommand Groups Server Configuration Display Checking the Current Server Settings Defining a Dialer Script String Type Default Value UsageDefining Dialer Script Strings Dialer String Descriptions Example Set Dialer Script Name Determining the Current Dialer Script Assigning the Dialer Script to a PortSteps Dialer Script Generic14400 Preferred Service Callhome Example The Show Port Command DisplayAssigning a Dialer Script to a Port Example Defining the Dialer Script Example Show New Port Configuration Verifying Dialer Script ConfigurationLocal Change Port 2 Dialer Script dickens Local Show Port Dialer Script Dickens Showing the Current Dialer Service Characteristics Defining the Dialer Service Example Show Dialer, Port Security Enabled Showing Dialer Service StatusLocal Show Dialer Attradeshow Characteristics Example Show Dialer Status Local Show Dialer Attradeshow Status Show Dialer Status Display FieldsStatus Meaning Displaying Dialer Counters Modifying the Dialer ServiceExample Show Dialer Counters Attradeshow Characteristic Description Comments Dialer Service CharacteristicsUser Account Characteristics Characteristic DescriptionComments Mode Mode Command VariablesUsername Configuring for Interactive Dial-Back Configuring Interactive Dial RequestsInteractive Dial-Back Dial Service Example Security Profile Information Configuring Dynamic Access Changing PPP Characteristics ExamplesConfiguring Call-Back Framed Dial Requests Framed Dial Requests Page ∙ Radius Chapter Managing Access Server Security Security Type Descriptions Radius AuthorizationKerberos Realm Definition Stage Description SecurIDUser Accounts Common Terminology Across Security Realms Radius Accounting Security ServerUDP Ports Kerberos Host Requirements Configuration PrerequisitesManaging Kerberos Network Access Server Requirements Configuration of User AuthenticationConfiguring Kerberos Settings Case Sensitivity Example Definition of Kerberos Settings Port Configuration Displaying Kerberos SettingsExample Sample Show Port Command Local show kerb characteristics Username smith.su@finance.acme.com Password not echoed User Authentication ProcedureExample Authentication with a Complete User Name User Authentication Counters Changing a User Name and PasswordExample Sample Kerberos User Authentication Session Alternative Password Command Setting the User Authentication Counters to Zero Port User Authentication CountersLocal Show Port 1 Authentication Counters Local Zero Server Authentication Counters Variables Minimal Setup for RadiusManaging Radius Local Change Radius Timeout seconds Optional Setup for RadiusExample Including the Realm Name Local Change Radius Interval seconds Example Defining Realm Default Authorization Attributes Radius User AuthorizationsExample Defining Password Authentication Type Number Value Description User Access to the Access ServerSetting User Permissions General Session Definition Attributes Additional Radius AttributesGeneral Session Attributes Framed Session Attributes Definition Framed Session Attributes Interactive session Definition Attributes Interactive Session Attributes Radius Overhead Definition Attributes Radius General Non-Session AttributesDigital Vendor-Specific Attributes Digital Vendor-Specific Attributes Radius Accounting Definition Attributes Radius Accounting Attributes Radius Optional Radius User Attributes Managing SecurID Using the Secret KeywordSecurID Prompts SecurID Ports Optional Setup for SecurID Minimal Setup for SecurIDLocal Change Securid Timeout seconds SecurID Realms SecurID User Authorizations Noprivileged level of Decserver Example Setting the Server Realm Managing Local Access Server SecurityDefining the Realm Local SET Server Realm JONAS.COM Example Showing Radius Characteristics Determining Security ConfigurationDisplaying RADIUS, SECURID, and Kerberos Characteristics Example Showing the Server Realm Example Showing SecurID Example Showing the Security Summary Example Displaying Kerberos CharacteristicsDisplaying Security Summary Showing the User Port Authorization Profile Showing the Authentication CountersExample Showing the User Port Authorization Profile Showing Security Counters Activating Autolink Example Configuring the Port Specifying an Authentication Method Enabling Autolink AuthenticationExample Enabling Autolink Authentication Authentication Chap Username Setting Autolink TimersExample Setting Autolink Timers Using a Login Script Timeouts Specifying Dedicated Service for LAT or Telnet Resources Specifying Other Security FeaturesKerberos Requirement LAT Protocol Requirement Local Change Port 5 Signal Control Enabled Specifying PasswordsTelnet Requirement Local Change Port 5 Dedicated SALE.MKT.DEC.COM Login Password Definition Example Specifying Password LimitLocal Change Server Login Password Total Local Change Port 5,6,7 Password Enabled Example Changing the Server Password Attempt Limit Page Accounting Accounting Log File Accounting Description What Events Are Logged? Contents of Log Entry Types Event Field Descriptions Above Ping Autolink Local Access For nondedicated/preferred case, whatever you Session Disconnect Event The number of bytes of successfully When Events Are Logged Snmp Community Modified Events Password Modified EventsUser Privilege Level Modified Events Example Defining the Accounting Log Size Managing AccountingDefining the Accounting Log Size Changing the Accounting Console Changing the Accounting ThresholdExample Changing the Accounting Threshold Example Changing the Accounting Console Local Show Accounting Characteristics Displaying Accounting CharacteristicsExample Displaying Accounting Characteristics Local Show Accounting LOG Displaying the Accounting LogExample Displaying the Accounting Log LAT Remote View of the Accounting Log Using the Accounting Console Logging Feature 57600 Example Telnet Remote View of the Accounting Log# Telnet x.x.x.x # Telnet x.x.x.x 2001 ACCT.LOG Cable and Adapter Table Appendix a Cable and Adapter RecommendationsCable and Adapter Hardware Cable and Adapter Recommendations Glossary Authentication trap AuthenticationBootptab file American Standard Code for Information Interchange Circuit timer BOOTP/TFTP ServerCommand line recall and edit Broadcast Cyclic Redundancy Check Dedicated serviceDatagram Data Set Ready Domain names DequeueDomain Name System Downline loading Failover Event loggingFlow control Gateway Internet Bootstrap Protocol Installation Verification ProcedureImage Initialization Internet Protocol Keepalive timerIP datagram Kerberos LAT architecture LAT serviceLAT Control Program LAT network Maintenance Operation Protocol Local serviceMulticast timer Local name server Network access server Name resolutionName server Network Control Program Preferred service Nonvolatile Random Access MemoryODL Font Protocol On-Demand Loading Font Protocol Print spooler Random Access MemoryPrivileged status Qualifier Service circuit-ID ServiceService node Remote print queue Service session Service ratingSession Session management Subnet identifier Switch charactersSubnet mask Synchronous Terminal Server Manager Terminal Device/Session Management ProtocolTerminal session Time To Live Virtual circuit User Datagram ProtocolWide Area Network XON/XOFF characters Index Symbols Internet Host 7-13 Telnet Listener Broadcast Telnet Listener DSV$CONFIGURE 4-4,4-6Cslip Delete Index-4 IBM Index-6 Appletalk Characteristics 8-5 DSV$CONFIGURE Index-8 Index-9 BOOTP/TFTP Internet TCP Keepalive Retry Session Appletalk Status 8-5 Queue Internet TCP Keepalive Timer 7-19 PortPort Session Status 11-27 Queue ALL AppleTalk ARP display 8-14 AppleTalk routes display Index-14

HP NetRider manual Ddp

Models: NetRider

Field

DDP.