Setting Up Your PC, PC Remote Access Software

Setting Up Your PC

PC Remote Access Software

Ensure you know whether the network access server port you are dialing in to requires you to enter a login password or logs directly in to the local user interface. If this is the case, you will need to use terminal emulation to communicate with the access server following modem connection.

Ensure you know whether the network access server port requires a PPP/PAP password. If so, you will have to configure the password on your remote node access software.

Reference

Refer to the documentation included with your PC remote node access software for installation and setup procedures.

Novell Workstation Software

Novell NetWare workstation software (or equivalent) must be installed on your PC. This makes it possible to establish and maintain IPX network connections.

Reference

Refer to your Novell Installation Guide for Workstations and the documentation included with your PC remote node access software for more information.

Novell Utilities for Local Execution

After a remote node access connection is made to a Novell fileserver, ensure that the Novell utilities you need are stored locally on your PC. This is because activating large executables from a network disk can result in long load times due to the relatively slower speed of the serial line. See the Novell Operation section in this chapter for more information.

20-6 Managing IPX

Page 404

Image 404

HP NetRider manual Setting Up Your PC, PC Remote Access Software, Novell Workstation Software

Contents

Revision/Update Information Software and Version Digital Equipment Corporation 199 7. All rights reserved Contents User Interface Managing Load Hosts Configuring LAT Characteristics Vii TCP/IP Network Characteristics Managing AppleTalk Configuring Basic Device Characteristics Configuring Modem Signals Configuring and Managing Interactive Devices Xiii Configuring and Managing LAT Services Configuring LPD Printers Configuring and Managing Slip Ports Configuring for Snmp Access Configuring and Managing 3270 Terminal Emulation TN3270 Configuring and Managing Point-to-Point Protocol PPP Ports Managing IPX Managing Dial Services Managing Access Server Security Xxiii Accounting Glossary Index Page Using This Manual PrefaceOverview Purpose Conventions Convention MeaningUppercase Text Associated Documents Digital Equipment Corporation How to Order Additional DocumentationTo Order Contact Online Services CorrespondenceDocumentation Comments FAXPage This Chapter Chapter Dnas ManagementIntroduction Configuration Tasks for System Administrators Configuration TasksTo Configure Refer to Default Settings To Manage Refer to Management Tasks for System AdministratorsSystem Management Tasks Local Help Tutorial Accessing Online HelpUser Tasks Memory Types Storage of Configuration Settings and Changes in MemoryPower Loss Commands to Display and Change Configuration Settings Types of Commands That Operate on Configuration SettingsReference Nvram Chapter Management Tools Command Provides Access to Commands to Enable Level Disable Access Server CommandsLevels of Access Server Commands User Groups Command DefinitionsCommand Result Privileged Commands Example Enabling Privileged CommandsExample Changing the Privileged Password Local SET Server Privileged Password Help Tutorial Command Help CommandExample Accessing Online Help Information Help Example Show Server Command Console PortDisplaying Port Parameters Local Show Server Features of the Remote Console Port Remote Console PortDescription Communications Utilities for Remote Console Sessions Usage Considerations Network Control Program NCPOpenVMS Utility Terminal Server Manager $ MCR NCP NCP Connect Node Shrimp Service Password Fedcba Use of SET HOST/MOP from a DECnet/OSI OpenVMS Node Use of CCR from an Ultrix DECnet Node Badcfe Telnet Remote Console Characteristics of the Telnet Remote Console Port CharacteristicDescription Related Information Access Server ManagerFunctions Page Chapter User Interface Command Groups and Menus Using Command Groups Creating a Command GroupExample Defining a Command Group Step Action Purging a Command Group Executing a Command GroupDisplaying a Command Group Using Menus Displaying a List of Enabled MenusEntering Menu Mode Example Show Menu Command Assigning a Default Menu to a Port Example Assigning a Default MenuLocal Define Port 2 Default Menu Hosts Menu Windows Figure Windows on Access Server Menus Main Menu Local Change Menu Services from MainDefining Menus Main Menu Display Defining Menu Choices Displaying a Selected Menu Example Sample Definition of a Menu Selection Using Menus to Set Up a Captive Port Exiting from a MenuDisplaying a Menu Definition Example Displaying a Menu Definition Local Purge Menu Main Line Local Purge Menu Hosts Example Commands to Purge Entire Menus and Menu LinesPurging Menu Lines and Entire Menus ∙ DSV$CONFIGURE ∙ Dsvconfig Chapter Managing Load Hosts Load Host Procedures Defining Symbols Backward Compatibility of DSV$CONFIGUREExecuting DSV$CONFIGURE ADD Command Example Starting DSV$CONFIGURE and Displaying HelpCommand Description Component Server Example DSV$CONFIGURE ADD Command Modify and SET CommandsDelete Command List and Show Commands Connect and USE CommandsExample Delete Command for DSV$CONFIGURE Example List Command for DSV$CONFIGURE Local Show User Local CTRL/D Context-Sensitive Help for DSV$CONFIGURE DECserver Configuration Procedure Dsvconfig Menu Using a BOOTP/TFTP Server IP Address Configuration Via Bootp Remote Connection Password Upline Dumps with MOP Hosts Upline Dumps with BOOTP/TFTP HostsUpline Dumping Terminal Server Manager TSM For TSM UsersPage Chapter Initializing the Access Server Preparing LAT Services for Initialization Do This Disabled Preparing Telnet Listeners for Initialization Initializing the Access Server Using the Initialize CommandDefault Mode for the Initialize Command Login Methods Specifying an Image Name When Initializing Specifying a Delay Value with InitializeSpecifying Initialization from a Load Host Updating Flash RAM Using the Diagnose Option with Initialize Specifying the Disable Option with InitializeInitialize Diagnose Option Tests Test Performs Using NCP to Initialize the Access Server NCP Initialization CommandsNCP Initialization Description Commands NCP Reference Booting from the Network Determining Boot ProtocolsLoading the Software Image Reference Booting Using Console Commands Procedure Boot Command Options Option Definition Associated Options Option Definition Associated Options Page Chapter Configuring LAT Characteristics LAT Characteristics Preparing to Change LAT CharacteristicsLAT Characteristic Summary Characteristic Default Range Refer to Section Service Groups Enabled DisabledPasscheck Queue Limit LAT Characteristics Display Example Displaying LAT CharacteristicsCommand To Use Announcements Characteristic Configure Announcements Example Circuit Timer Characteristic Changing the Circuit TimerIncreasing the Circuit Timer Decreasing the Circuit Timer Identification Characteristic Identification String in a Login Procedure DisplayChanging the Server Identification String Removing an Identification String Keepalive Timer Characteristic Keepalive Timer Default ValuesKeepalive Timer Example Local Change Server Keepalive Multicast Timer Characteristic Multicast Timer Default ValuesChanging Multicast Timer Values Example Local Change Server Multicast Timer Access Server Name Characteristic Default Access Server NameChanging the Access Server Name Local Change Server Name Printing Local Change Server Node Limit Node Limit CharacteristicChanging the Access Server Node Limit Access Server Number Characteristic Access Server Number ValuesChanging the Access Server Number Local Change Server Number Passcheck Characteristic Changing the Passcheck CharacteristicsPasscheck Characteristic Example Local Change Server Passcheck Enabled Queue Limit Characteristic Special Queue Limit ValuesChanging the Queue Limit Local Change Server Queue Limit None Retransmit Limit Characteristic Changing the Retransmit Limit CharacteristicRetransmit Limit Values Local Change Server Retransmit Limit Responder Characteristic Access Server MappingDatagram Types Datagram Name Description Changing the Responder Characteristic Local Change Server Responder Enabled Service Groups Viewing Service GroupsChanging Access Server Service Groups Changing Service Groups Examples Chapter TCP/IP Network Characteristics TCP/IP Network Characteristics Configuring the Internet Address and Subnet Mask Setting the Internet AddressTasks Alternative Learning IP Information Setting an Internet Subnet Mask Internet Address Class Default Subnet Mask Configuring the Internet Address and Subnet Mask Local Show Internet Displaying the Internet Address and Subnet MaskInternet Address and Subnet Mask Display Example Configuring Domain Name System DNS Characteristics Displaying DNS CharacteristicsLocal Show Internet Name Resolution Internet DNS Character Display Example Field Description DNS DNS Counter Display Example Local Show Internet Name Resolution CountersDisplaying the DNS Counters Configuring the Default Name Resolution Domain Configuring and Using Default Name Resolution Domain Example Using Trailing Dots Local Connect SALES.REVENUE Changing the Name Resolution Mode Name Resolution ModesChanging the Time Limit Changing the Retry Limit Configuring a List of Commonly Used Internet Hosts Configuring a List of Internet Name ServersIf Using a Name Server Configuring a Root Name Server Configuring a Name Server for a Different Domain Name Resolution and Gateways Assigning DNS Server Addresses Automatically Pass Description Configuring a List of Internet Gateway Addresses Configuring a Default GatewayDefault Gateway Definition Example Displaying a List of Gateway Addresses Defining Networks Available Through a Specific Gateway Defining Subnets Available Through a Specific GatewayDefining Hosts Available Through a Specific Gateway Subnet Definition Through a Specific Gateway Example Configuring a List of Internet ARP Entries Displaying the List of Internet ARP EntriesDefining an ARP Entry Sample List of Internet ARP Entries Setting the TCP Keepalive Timer What the Timer DoesSetting the Timer Disabling the Timer Displaying Timer Characteristics Timer Characteristics DisplayRetry Set Example Local Change Internet TCP Keepalive Retry Using the Show Command Displaying the Internet CountersInternet Counters Display Example Local Show Internet Counters Internet Counter Display Fields Bytes Data Retransmitted Total number Field Description 24 TCP/IP Network Characteristics Learning Operation Learning IP Information From a Bootp ServerBootp Server Configuration Setting Up IP Configuration Learning Local Define Internet EnabledLocal List Internet Local Define Internet Address None Learning IP Information From a Dhcp Server Bootp and Dhcp DifferencesUsing a Bootp Server Using a Dhcp Server Dhcp Client Operation Dhcp Proxy Operation IP Address Assignment Displaying the Dhcp Setting Configuring Default ValuesTo Do This Use This Command Enabling and Disabling Dhcp What Is Wins Autoconfigure? Assigning Wins Server AddressesWhat Does Wins Do? Operation Displaying Wins Characteristics Assigning Wins AddressesWins Address Example Wins Display Example Field Description Page Chapter Managing AppleTalk Overview Configuring AppleTalk on an Access Server Local Define Appletalk EnabledAppleTalk Address Format Enabling AppleTalk Setting AppleTalk Address Cache Size Local Define Appletalk DisabledDisabling AppleTalk Local Define Appletalk address Cache size n Configuring AppleTalk on an Access Server Displaying AppleTalk Characteristics CommandsDisplaying AppleTalk Characteristics Example Fields in the AppleTalk Characteristics Display Command Displaying AppleTalk CountersDisplaying AppleTalk Counters Example Fields in the AppleTalk Counters Display DDP ZIP NBPRtmp Aarp Values Displaying AppleTalk Status Displaying AppleTalk Status ExampleFields in the AppleTalk Status Display Field Value Description AppleTalk is fully operational Displaying AppleTalk Routes Displaying AppleTalk Routes ExampleFields in the AppleTalk Routes Display Local Show Appletalk Routes Field Value Description Displaying AppleTalk ARP Entries Displaying AppleTalk ARP Entries ExampleFields in the AppleTalk ARP Display Local Show Appletalk ARP Entries Field Value Description Page Chapter Configuring Basic Device Characteristics Characteristic Default Allowed Refer to Values Section Configuring Basic Device CharacteristicsBasic Device Characteristic Summary Longbreak Logout Longbreak Output FlowParity Speed Local Show Port Displaying Basic Device CharacteristicsDisplaying Port Characteristics Example Configuring the Access Characteristic Defining the Access Characteristic ExampleCharacteristic Device Type Examples Local Define Port 5 Access Remote Setting For These Devices Matching the Port and Device CharacteristicsAutobaud Settings Setting Check Performed Per Character Character Size Parity Example Changing the Port Speed Example Changing the Parity SettingsExample Setting the Stop Bits for a Device Device Types Device Type Applies toExample Changing the device Type Local Change Port 5 Type Hardcopy Configuring the Flow Control Characteristic When to UseFlow Control Types ∙ XON/XOFF ∙ DSR ∙ CTS Example Enabling CTS Flow Control Example Enabling XON/XOFF Flow ControlExample Enabling DSR Flow Control Flow Control Direction Example Disabling Flow ControlExample Enabling Input Flow Control Example Enabling output Flow Control Specifying the Automatic Logout Characteristics Specifying DsrlogoutSpecifying Longbreak Logout Example Enabling Dsrlogout Specifying the Inactivity Timer Example Changing the Inactivity Timeout PeriodSpecifying Inactivity Logout Example Enabling Inactivity Logout Chapter Configuring Modem Signals DTE/DCE Device Configuration Port Configuration Determining the Supported Modem Signals Access Servers and Modem ControlAccess Server Types and Supported Modem Signals Network Access Server Modem Signals Supported Type Set Modem Signal Description Modem Signals DescriptionTypes of Modem Signal Dsrs Computer Interface Specifying Modem Control and Signal ControlLogging Out the Port with Dsrlogout or Longbreak Logout Example Enabling Modem Control Example Enabling Signal ControlLocal Define Port 5 Modem Control Enabled Local Logout Port Example Enabling Signal Select Specifying Signal SelectDetermining When to Use a Signal Set Local Change Port 7 Signal Check Enabled Specifying Signal CheckExample Enabling Signal Check Enabling Dtrwait Example Local Change Port 3 Dtrwait EnabledSpecifying Dtrwait Specifying Ring Specifying Alternate Speed Specifying Dialup Sample Modem Configurations Configuring a Dial-In Modem on a Full Modem Control ServerConfiguring a Dial-In Modem on a Modem Control Server Modem Control Configuring a Dial-Out Modem on a Full Modem Control Server Configuring a Dial-Out Modem on a Modem Control Server Modem Control Sequences Establishing a Connection Disconnecting Response to Momentary Loss of CTS Configuring DTR and DSR Signals Port Characteristic Effects on the DTR and DSR SignalsEnabled Characteristic DTR and DSR Actions Signal Control Dtrwait Check Dsrlogout Signal ControlSignal CHECK, Dtrwait Chapter For More Information ∙ Managing Users ∙ Managing Sessions Configuring an Interactive Device for LAT Sessions Configuring an Interactive Device for LAT Sessions Sample Network Configuration Configuring LAT Group Codes for Interactive Devices Example Enabling Autoconnect Local Change Port 5 Autoconnect EnabledSpecifying Autoconnect Specifying the Default Protocol Local Change Port 5 Autoprompt DisabledSpecifying Autoprompt Example Disabling Autoprompt Configuring Port Queuing Specifying FailoverExample Disabling Port Failover Example Enabling Queuing on a Port Displaying Access Server Queue Entries Option Displays Entries For Removing Entries from the Access Server Queue Show Queue ALL Display ExampleEffect on the Queue Example Remove Queue Configuring Port Characteristics Local Change Port 5 Remote Modification Enabled Configuring an Interactive Device for Telnet Sessions Configuring a Device on Port 6 for Internet Hosts Example Reference Configuring a Session Management TD/SMP Terminal How to ConfigureLocal Change Port 2 Multisessions Enabled Benefits and Restrictions Summary Local Mode Command Restrictions During Session Management Command Descriptions Logging In with Multisessions Configuring On-Demand Loading for Asian Terminals On-Demand Loading Configuration ExampleDisable Switch Character Local Change Port 5 ON-DEMAND Loading Enabled Configuring for Block-Mode Terminals Buffer Size Profiles Types Profile CharacteristicsSpecifying the Telnet Client Session Profile Session Character Binary Characteristics Profiles Switch Characters Terminal Type Modifying Telnet Session Characteristics Specifying Echo CharacteristicsSpecifying the Binary Characteristic Example Specifying Echo Characteristics Specifying Character Size Mapping Keyboard Characters to Telnet Functions Local Change Port 5 Telnet Client AO None Function Description DefaultTelnet Keymapping Functions Specifying Autoflush Specifying AutosynchSpecifying Telnet Client Newline Example Disabling Autoflush Local Change Port 5 Telnet Client Flow Control Disabled Specifying Flow ControlExample Specifying Telnet Client Newline Examples Enabling Flow Control Specifying Message Verification Specifying the Switch CharacterExample Configuring Message Verification Example Configuring Switch Character Specifying a Preferred Terminal TypeExample Specifying Terminal Type Local Change Port Telenet Client Terminal VT321 Optional Setup for Local User Accounts Managing Access Server User AccountsMinimal Setup for Local User Accounts Authorization Profile Information SHOW/LIST/MONITOR Useraccount Display Service Types and Access Levels Service Permissions AccessService Type Description Service Type User Access User Account Command Parameters Command Description Variables Comments Clause Access Command Variables Variable Definition Managing Users Providing a Contact Name and Access Server LocationSpecifying Preferred Service for LAT or Telnet Resources Example Enabling a Preferred Telnet Service Examples Configuring Port UsernameSpecifying the Port Username For the Telnet Protocol Local Change Port 5 Forward Switch F Backward Switch B Specifying Keys to Switch Between SessionsExample Defining Keys as Switches Specifying a Key to Switch to Local Mode Defining the Break Key Example Configuring a Key as a Switch Example Disabling a Local SwitchSpecifying Broadcast Example Disabling Broadcast Messages Example Disabling Loss Notification Specifying Loss NotificationExample Broadcast ALL Specifying Message Codes Specifying VerificationSpecifying Lock Example Disabling Verification Example Configuring Lock Displaying Information About the UsersExample Show Users Display Local Show Users Heading Description Specifying User GroupsSHOW/LIST/MONITOR Users Display Headings Example Assigning User Groups Local SET Port Groups Initiating a Session to a LAT Service Example Initiating a Session to a LAT ServiceManaging Sessions Initiating a Session to an Internet Host Sending Telnet Functions to a Remote Telnet Server Example Initiating a Session with an Internet HostLocal Open Sales Local Telnet Sales Local Send Telnet AO Controlling the Number of Sessions Example Changing the Server Session LimitLocal Change Server Session Limit Local Change Port 5 Session Limit Local Show Sessions Port 1,2 Displaying Session InformationExample Show Sessions Display SHOW/MONITOR Sessions Display Fields Displaying Session Characteristics Local Show Port 4 Sessions 1 CharacteristicsDisplaying Session Status Local Show Port 14 Session 1 Status SHOW/MONITOR Port Sessions Status Display Fields Flow Control commands to enable Terminating Sessions Page Chapter Configuring and Managing LAT Services Prerequisites Configuring a Port to Offer a LAT Service Configuration Parameters Enabling Announcements Configuring Access to a LAT ServiceAssigning a Service Name Assigning an Identification String Assigning a Port NameExample Clearing the Identification String Port Naming Guidelines Specifying the Service Password Password LimitExample Assigning a Service Password Example Clearing the Service Password Configuration of Specific Types of Devices As LAT Services Example Configuring a PC As a Terminal and LAT Service Local Define Port 2 Dedicated None Dialup Enabled Dsrlogout Configuring a Computer As a LAT ServiceExample Configuring a Computer As a LAT Service on Port Configuring a Modem As a LAT Service Example Configuring a Dial-In and Dial-Out Modem Configuring a Printer As a LAT Service Setting Up a LAT Remote Print Queue on an OpenVMS HostExample Configuring a Printer As a LAT Service on Port Privileges for Running Latcp Creating a Logical Device to Access a Printer Service Configuring a Logical Device to Connect a Specific PortUsing a Remote Printer Command File LTLOAD.COM Setting Up a LAT Remote Print Queue on an Ultrix System Configuration of Specific Types of Devices As LAT Services Configuring a Printer with Unannounced Availability Configuring a Printer with Unannounced Availability More Examples Verifying the LAT Service Problem SolvingExample Verifying the LAT Service Local Connect LAT Adevice Destination PORT5 Displaying Information About a Service Displaying Services Characteristics Local Show Service Printer Characteristics Example Show Service Characteristics DisplaySHOW/LIST/MONITOR Service Characteristics Display Fields Displaying Services Status Local Show Service Develop Status Example Show Service Status DisplaySHOW/LIST/MONITOR Service Status Display Headings Displaying Services Summary Local Show Services ALL Summary Example Show Service Summary DisplaySHOW/LIST/MONITOR Service Summary Display Headings Page Chapter Configuring and Managing Telnet Servers Sample Device Configurations Configuring a Printer for Access Through a Telnet ListenerLocal Define Port 4 Access Remote Autobaud Disabled Break Local Define Port 4 Dedicated None Dsrlogout Disabled Flow Configuring a Computer for Access Through a Telnet Listener Configuring a Modem for Access Through a Telnet ListenerSample Device Configurations Example Configuring a Dial-Out Modem 890-1234 Local Change Telnet Switching Modes Sample ConfigurationConfiguring Personal Computer Access to a Printer Setting User Priority for Devices Using Dynamic Access Local Change Port 5 Interrupts Enabled Break Local Configuring a File Transfer Partner Partner Guidelines Configuring a Remote Print Queue Configuring a TCP/IP Remote Print Queue on an Ultrix SystemPrinter Port Telnet Server Characteristics Characteristic Setting # lprsetup Configuring a TCP/IP Remote Print Queue on a Unix System Configuring a Telnet Listener Configuring Telnet Server Session Characteristics Mapping Event Indications to Keyboard CharactersEvent Indications Event Indication Description Specifying Newline Characteristics Local Change Port 5 Telnet Server Character Example Setting Character Size in a Specific Direction Local Change Port 5 Telnet Server Transmit Character Size Managing Your Access Server As a Telnet Listener Node Displaying Telnet Server CharacteristicsExample Show Port Telnet Server Characteristics Display Displaying Telnet Listeners Example Removing a Telnet Listener Removing a Telnet ListenerRemoving One of Many Devices Assigned to a Telnet Listener Reassigning a Port Supplying User Location Data to Telnet Servers Example TCP Messages to Poll Client User Location Data Configuring a Raw TCP Listener When To Use Raw TCPConfiguring Raw TCP Example Configuring Raw TCP Displaying Raw TCP Characteristics Example Raw TCP Display Chapter Configuring LPD Printers LPD Operation Supported File TypesControl and Data Files This File Contains LPD Operation Operation Configuring LPD Configuring Remote HostsAssociating a Printer With a Port If Printing From Then This Host Setting Port Characteristics Characteristic Description Printer Configuration Example Displaying Printer CharacteristicsPrinter Display Example Local Show Printer ALL Local Show Printer Speedy Status Speedy Chapter Configuring and Managing Slip Ports Configuring and Managing Slip Ports Network Configuration Containing Slip Hosts Packet Forwarding to and from Slip Hosts Local Show Port 5 Slip Characteristics Displaying Slip CharacteristicsDisplaying Slip Characteristics Example Managing Internet Addresses for Slip Hosts Assigning a Host Internet AddressRadius Specified Slip Host Address Local Change Port Slip Host Address How a Port Automatically Obtains the Slip Host Address Managing the Maximum Transmission Unit Changing the MTURelationship of the TCP Maximum Segment Size and the MTU Fragmentation Example Configuring a PC As a Terminal and Slip Host Define Port Default Protocol Slip Dsrlogout Enabled Configuring a Dedicated Slip Port Configuring a Device As a Dedicated Slip Host Configuring a Dial-In Modem for Use with a Slip Host Establishing Terminal Sessions with a PC Prerequisites After Making a Connection Establishing a Slip SessionEnabling a Slip Session from the PC Compressed Slip Enabling CslipDisabling Cslip Automatic Cslip Displaying Slip Counters Show Port Slip Counters DisplaySlip Counters Display Fields Local Show Port 5 Slip Counters Disabling Slip Disable Slip ExampleLocal Change Port 2 Slip Disabled Page Chapter Configuring for Snmp Access Supported Snmp Features Supported SpecificationsSnmp Community Names Supported Snmp Operations MIB Description Supported MIBsSupported MIB Variables Supported Management Information Base Variables Configuring the Access Server for Snmp Access Default Community Name PublicEnabling and Disabling Snmp Displaying Information About Snmp Configuring a Community Name for Access by Any NMS Configuring a Community Name with an AddressExample Configuring Community Names for Access by Any NMS One IP Address for a Community Name This Event Occurs When Configuring Community Names to Send Trap MessagesExample Configuring Snmp Trap Messages Sample Snmp Configuration Local Clear Snmp Community Server Trap DisabledDisabling Trap Messages for a Community Name Removing Community Names Removing an Address from a Community Name Example Removing the Community Name Internet AddressLocal Clear Snmp Community Bugs Local Change Snmp Community Server Address ANY Configuring the NMS Chapter Managing the Access Server Managing Your Access Server As Part of the LAT Network Distributing Devices on Access ServersControlling the Number of Known Service Nodes Checking LAT Service Accessibility Reducing Memory Usage Viewing LAT Node Status InformationExample Show Node Status Display Local Show Node Peach Status SHOW/LIST/MONITOR Node Status Display Fields Viewing LAT Node Counters Information Local Show Node Peach Counters Example SHOW/LIST/MONITOR Node Counters DisplayTSHOW/LIST/MONITOR Node Counters Display Fields Field Description Viewing LAT Node Summary Information Ports with Limited View Local Show Node ALL Summary Example Node Summary DisplayNode Summary Display Fields Displaying Information About the Access Server Displaying Access Server CountersSpecifying the Prompt Local Change Server Prompt Engineering Example Show Server Counters Display SHOW/LIST/MONITOR Server Counters Display FieldsEthernet Data Link Counters Local Show Server Counters Field Description Field Description Field Description LAT protocol Counters Local Show Server Status Displaying Access Server StatusExample Show Server Status Display MOP Field Description Memory used for storing service and node Field Description Field Description Displaying Access Server Summary Information Local Show Server Summary Example Show Server Summary DisplaySHOW/LIST/MONITOR Server Summary Display Fields Displaying Port Characteristics Checking Port Status and Counters Displaying Port Counters Example Show Port Characteristics DisplayLocal Show Port 1 Characteristics Local Show Port 1 Counters Example Show Port Counters DisplaySHOW/MONITOR Port Counters Display Fields Displaying Port Status Example Show Port Status DisplaySHOW/MONITOR Port Status Display Fields Local Show Port 1 Status Field Description Local Show Ports ALL Summary Displaying Port SummaryExample Show Port Summary Display SHOW/LIST/MONITOR Port Summary Display Fields Configuring and Managing 3270 Terminal Emulation TN3270 Supported Ascii Terminals Definition Server-Specific Keyboard Maps Definition and Description of a Keyboard MapKeyboards Configuring Basic 3270 Terminal Emulation Setting Up an Ascii Terminal Terminal Setup Parameters Terminal Model Setup ParametersIndicating the 3270 Model Number Specifying the Type of Ascii Terminal Used for Emulation Connecting to an IBM Host Status Line IndicatorIBM Host Communications Entering and Editing Data Status Line Messages Message Description Status Line Indicator Display Default Server-Wide Terminal Types and Keyboard Maps Displaying and Customizing Keyboard MapsServer-Wide Keyboard Maps Customization Local Show TN3270 Terminal Default Server-Wide Terminal Type and Keyboard Maps Predefined Terminal Type Default Keyboard MapDefining New Server-Wide Terminal Types and Keyboard Maps Local Show TN3270 Keymap VT220 Customizing Server-Wide Keyboard Maps Rules for Customizing Keyboard MapsLocal Change TN3270 Terminal PC100DCA Keymap Newkeys Local Change TN3270 Keymap Newkeys Clear CTRL/W Local Show TN3270 Terminal Selecting and Customizing Keyboard Maps for a Port Keyboard Map and Terminal TypePredefined Terminal Device Associated Keyboard Map VT100, Ansi Local Change Port TN3270 Keymap Newline Ctrl/J Customizing a Default Keyboard Map for a PortLocal Change Port 2 TN3270 Terminal VT420 Example Show Port TN3270 Keymap Command Following example shows a partial display of a keymap Command Enables You to Display and Modify ASCII-to-EBCDIC and EBCDIC-to-ASCII Translation TablesSHOW/SET TN3270 Atoe SHOW/SET TN3270 Etoa TN3270 Commands That Free Nvram Space Command Frees Nvram Space Used ByGuidelines for Managing the Use of Nvram for TN3270 Storage Requirements for TN3270 Definitions in Nvram Limiting Nvram Usage Local Define Port TN3270 Nvram Limit Command Description Default Commands to Manage TN3270 Terminal EmulationTN3270 Access Server Characteristics TN3270 Port Characteristics Description Default Show Commands DisplaysPage Configuring and Managing Point-to-Point Protocol PPP Ports Example Enabling PPP for Mixed Traffic Enabling PPP on an Access Server PortEnabling PPP for Mixed Traffic Enabling Dedicated PPP Traffic Enabling Ports with Modems for PPP Local Connect PPP Using the Connect PPP CommandEstablishing and Ending a PPP Session Displaying PPP Characteristics Displaying LCP CharacteristicsExample Displaying LCP Characteristics Local Show Port 5 PPP LCP Characteristics Fields in the LCP Characteristics Display Field Description Values Default Displaying Ipcp Characteristics Ipcp Example Ipcp Characteristics DisplayIpcp Characteristics Display Fields Field Description Values Default Atcp Characteristics Example Atcp Characteristics DisplayAtcp Characteristics Display Field Values Local Show Port 5 PPP Atcp Characteristics Field Description Values Default Displaying PPP Status Displaying LCP StatusExample LCP Status Display Local Show Port 5 PPP LCP Status Fields in the LCP Status Display Displaying Ipcp Status Example Ipcp Status Display Fields in the Ipcp Status Display Local Show Port 5 PPP Atcp Status Displaying Atcp StatusExample Atcp Status Display Fields in the Atcp Status Display Example Commands to Display LCP Counters Displaying PPP CountersDisplaying LCP Counters Local Show Port 5 LCP Counters Fields in the LCP Counters Display Displaying Ipcp Counters Local Show Port 5 Ipcp Counters Example Command to Display the Ipcp CountersFields in the Ipcp Counters Display Displaying Atcp Counters Local Show Port 5 Atcp Counters Example Command to Display the Atcp CountersFields in the Atcp Counters Display Field Description Chapter Managing IPX Access Server Configuration IPX Description Login Procedures Checklist Getting Started Hardware and Software Requirements Software RequirementsHardware Requirements References Setting Up Your PC PC Remote Access SoftwareNovell Workstation Software Novell Utilities for Local Execution Setting Up the Network Access Server Configuring the Port for an Attached DeviceLocal Change IPX Internal ipx-net Local Change IPX Enabled Enabling IPX Activating PPP Configuring the Port for the Login MethodConfiguring the Port for Login to the Local Prompt Enabling PPP/PAP Password Authentication Configuring the Port Dedicated to PPPConfiguring the Port for PPP/IPXCP Data Link Local Change Port n LCP Authentication Disable Disabling PPP/PAP Password AuthenticationPasswords Summary of DECserver IPX Management Commands Port PPP IPX Commands for LCPPort n LCP SHOW/MONITOR Port n Description Port PPP IPX Commands for Ipxcp Port PPP Commands for PPP Negotiation StatusPort n Ipxcp Display the values of the Ipxcp counters Display the values of the PPP counters Server IPX CommandsCharacteristics SNAP802 Learn Dial-Out PC Modems Modem ConsiderationsDial-In Modems Recommended Serial Port Baud Rate Novell Client/Server Operation Novell Operation Novell Client/Server Operation Verifying Configuration Operational Checkout and Diagnosis Disabling IPX Using the Define CommandLocal Define IPX Disabled Frame Types Standard EthernetRAW802 SAP802 Displaying IPX Characteristics IPX Characteristics DisplayIPX Characteristics Display Fields Local Show IPX Characteristics Field Description Using the Show IPX Command Displaying IPX StatusIPX Status Display Fields in the IPX Status Display Use the Show IPX Counters command Displaying IPX CountersIPX Counters Display IPX Counters Display Fields Field Description Field Description Using the Show IPX Routes Command Displaying IPX RoutesIPX Routes Display IPX Routes Display Fields Resetting Counters Using the Zero CommandZero Command Options Option DescriptionPage Chapter Managing Dial Services Entering the SET Privileged command Dial Services Command GroupsCommand Groups Checking the Current Server Settings Server Configuration Display String Type Default Value Usage Defining a Dialer ScriptDefining Dialer Script Strings Dialer String Descriptions Example Set Dialer Script Name Determining the Current Dialer Script Assigning the Dialer Script to a PortSteps Example The Show Port Command Display Dialer Script Generic14400 Preferred Service CallhomeAssigning a Dialer Script to a Port Example Defining the Dialer Script Verifying Dialer Script Configuration Example Show New Port ConfigurationLocal Change Port 2 Dialer Script dickens Local Show Port Dialer Script Dickens Defining the Dialer Service Showing the Current Dialer Service Characteristics Showing Dialer Service Status Example Show Dialer, Port Security EnabledLocal Show Dialer Attradeshow Characteristics Example Show Dialer Status Local Show Dialer Attradeshow Status Show Dialer Status Display FieldsStatus Meaning Modifying the Dialer Service Displaying Dialer CountersExample Show Dialer Counters Attradeshow Dialer Service Characteristics Characteristic Description CommentsUser Account Characteristics Characteristic DescriptionComments Mode Mode Command VariablesUsername Configuring Interactive Dial Requests Configuring for Interactive Dial-BackInteractive Dial-Back Dial Service Example Security Profile Information Changing PPP Characteristics Examples Configuring Dynamic AccessConfiguring Call-Back Framed Dial Requests Framed Dial Requests Page Chapter Managing Access Server Security ∙ Radius Radius Authorization Security Type DescriptionsKerberos Realm Definition Stage Description SecurIDUser Accounts Common Terminology Across Security Realms Radius Accounting Security ServerUDP Ports Kerberos Host Requirements Configuration PrerequisitesManaging Kerberos Configuration of User Authentication Network Access Server RequirementsConfiguring Kerberos Settings Case Sensitivity Example Definition of Kerberos Settings Displaying Kerberos Settings Port ConfigurationExample Sample Show Port Command Local show kerb characteristics Username smith.su@finance.acme.com Password not echoed User Authentication ProcedureExample Authentication with a Complete User Name Changing a User Name and Password User Authentication CountersExample Sample Kerberos User Authentication Session Alternative Password Command Port User Authentication Counters Setting the User Authentication Counters to ZeroLocal Show Port 1 Authentication Counters Local Zero Server Authentication Counters Variables Minimal Setup for RadiusManaging Radius Optional Setup for Radius Local Change Radius Timeout secondsExample Including the Realm Name Local Change Radius Interval seconds Radius User Authorizations Example Defining Realm Default Authorization AttributesExample Defining Password Authentication Type Number Value Description User Access to the Access ServerSetting User Permissions General Session Definition Attributes Additional Radius AttributesGeneral Session Attributes Framed Session Attributes Framed Session Attributes Definition Interactive Session Attributes Interactive session Definition Attributes Radius General Non-Session Attributes Radius Overhead Definition AttributesDigital Vendor-Specific Attributes Digital Vendor-Specific Attributes Radius Accounting Attributes Radius Accounting Definition Attributes Optional Radius User Attributes Radius Using the Secret Keyword Managing SecurIDSecurID Prompts SecurID Ports Minimal Setup for SecurID Optional Setup for SecurIDLocal Change Securid Timeout seconds SecurID Realms SecurID User Authorizations Noprivileged level of Decserver Managing Local Access Server Security Example Setting the Server RealmDefining the Realm Local SET Server Realm JONAS.COM Example Showing Radius Characteristics Determining Security ConfigurationDisplaying RADIUS, SECURID, and Kerberos Characteristics Example Showing SecurID Example Showing the Server Realm Example Showing the Security Summary Example Displaying Kerberos CharacteristicsDisplaying Security Summary Showing the Authentication Counters Showing the User Port Authorization ProfileExample Showing the User Port Authorization Profile Showing Security Counters Example Configuring the Port Activating Autolink Enabling Autolink Authentication Specifying an Authentication MethodExample Enabling Autolink Authentication Authentication Chap Username Setting Autolink TimersExample Setting Autolink Timers Timeouts Using a Login Script Specifying Other Security Features Specifying Dedicated Service for LAT or Telnet ResourcesKerberos Requirement LAT Protocol Requirement Specifying Passwords Local Change Port 5 Signal Control EnabledTelnet Requirement Local Change Port 5 Dedicated SALE.MKT.DEC.COM Specifying Password Limit Login Password Definition ExampleLocal Change Server Login Password Total Local Change Port 5,6,7 Password Enabled Example Changing the Server Password Attempt Limit Page Accounting Accounting Description Accounting Log File Contents of Log Entry Types What Events Are Logged? Event Field Descriptions Above Autolink Ping Local Access For nondedicated/preferred case, whatever you Session Disconnect Event The number of bytes of successfully When Events Are Logged Snmp Community Modified Events Password Modified EventsUser Privilege Level Modified Events Example Defining the Accounting Log Size Managing AccountingDefining the Accounting Log Size Changing the Accounting Threshold Changing the Accounting ConsoleExample Changing the Accounting Threshold Example Changing the Accounting Console Local Show Accounting Characteristics Displaying Accounting CharacteristicsExample Displaying Accounting Characteristics Local Show Accounting LOG Displaying the Accounting LogExample Displaying the Accounting Log Using the Accounting Console Logging Feature LAT Remote View of the Accounting Log Example Telnet Remote View of the Accounting Log 57600# Telnet x.x.x.x # Telnet x.x.x.x 2001 ACCT.LOG Cable and Adapter Table Appendix a Cable and Adapter RecommendationsCable and Adapter Hardware Cable and Adapter Recommendations Glossary Authentication Authentication trapBootptab file American Standard Code for Information Interchange BOOTP/TFTP Server Circuit timerCommand line recall and edit Broadcast Dedicated service Cyclic Redundancy CheckDatagram Data Set Ready Dequeue Domain namesDomain Name System Downline loading Event logging FailoverFlow control Gateway Installation Verification Procedure Internet Bootstrap ProtocolImage Initialization Keepalive timer Internet ProtocolIP datagram Kerberos LAT service LAT architectureLAT Control Program LAT network Local service Maintenance Operation ProtocolMulticast timer Local name server Name resolution Network access serverName server Network Control Program Nonvolatile Random Access Memory Preferred serviceODL Font Protocol On-Demand Loading Font Protocol Random Access Memory Print spoolerPrivileged status Qualifier Service Service circuit-IDService node Remote print queue Service rating Service sessionSession Session management Switch characters Subnet identifierSubnet mask Synchronous Terminal Device/Session Management Protocol Terminal Server ManagerTerminal session Time To Live User Datagram Protocol Virtual circuitWide Area Network XON/XOFF characters Symbols Index Broadcast Internet Host 7-13 Telnet Listener DSV$CONFIGURE 4-4,4-6 Telnet ListenerCslip Delete Index-4 IBM Index-6 Appletalk Characteristics 8-5 DSV$CONFIGURE Index-8 Index-9 BOOTP/TFTP Session Internet TCP Keepalive Retry Appletalk Status 8-5 Queue Internet TCP Keepalive Timer 7-19 PortPort Session Status 11-27 Queue ALL AppleTalk ARP display 8-14 AppleTalk routes display Index-14