HP NetRider Removing an Address from a Community Name

Configuring the Access Server for SNMP Access

After you remove a community name, any NMS that used the community name is no longer able to communicate with the access server.

The following example shows how to remove community name BUGS:

Local> CLEAR SNMP COMMUNITY "BUGS"

Removing an Address from a Community Name

You can remove an NMS address from a community name by using the ANY keyword in the CHANGE SNMP COMMUNITY community-nameADDRESS command. This keyword allows any NMS that knows the community name to access the access server. The access server, however, rejects an ADDRESS ANY command if TRAP access is enabled.

Example: Removing the Community Name Internet Address

The following example shows how to remove the Internet address from community name SERVER:

Local> CHANGE SNMP COMMUNITY "SERVER" ADDRESS ANY

Configuring for SNMP Access 16-9