HP NetRider Assigning the Dialer Script to a Port, Steps, Determining the Current Dialer Script

Assigning the Dialer Script to a Port

Assigning the Dialer Script to a Port

Steps

After configuring the dialer strings in a dialer script, assign the script to a specific port. Do the following:

Step Action

1Are you defining the dialer script to the port for the first time?

•If yes, go to step 2.

•If no, use the SHOW PORT n command to determine the current dialer script by showing the port (optional). If you assign a dialer script to a port that already has an assigned dialer script, the access server overwrites the first dialer script. When you change or set a dialer script, it is a good idea to check to see if one is in use.

2Assign the new dialer script to the desired port using the DEFINE PORT n DIALER SCRIPT command.

Determining the Current Dialer Script

Use the SHOW PORT n command to display information about specific ports and their current configuration. The SHOW PORT command helps you to determine how a port is configured before you begin making changes to that port.

21-6 Managing Dial Services