Defining the Dialer Service
Displaying Dialer CountersUse the SHOW DIALER
Example: Show Dialer Counters
The following example shows the dialer service counters display for the dialer service
AT_TRADESHOW:
Local> SHOW | DIALER AT_TRADESHOW COUNTERS |
|
| |
Dial Service: | AT_TRADESHOW |
|
| |
Seconds Since Zeroed: | 1989692 | Failures: | 17 | |
Connections | Attempted: | 113 | Busy: | 10 |
Connections Completed: | 96 | No Answer: | 0 | |
No Dial Tone: | 0 | No Response: | 0 | |
No Carrier: |
| 0 | Authentication: | 7 |
Unknown: |
| 0 |
|
|
Local>
Modifying the Dialer ServiceUse the SET/DEFINE/CHANGE DIALER SERVICE
The dialer service name must be unique to the server. Before you create a new dialer service, use the SHOW DIALER SERVICE command to verify that the new name does not conflict with that of an existing dialer service.
For a detailed explanation of command keywords used to mange dialer services, see the Command Definitions section in Chapter 2.
Example: Change Dialer Name
The following example uses many of the keyword options in the command line:
Local> CHANGE DIALER on_the_road PORT
Local> CHANGE DIALER on_the_road NUMBER "*" MODE *