Displaying Information About the Access Server
Field | Description |
|
|
Load Address | Ethernet address of the node or the gateway from |
| which the access server was last loaded. Some |
| access servers display all zeroes if a downline load |
| occurs using BOOTP and TFTP. |
Dump Address | Ethernet address of the node or gateway that |
| received the last |
| display all zeroes if a dump is to an Internet host. |
Console User | Address of the node at which the Remote Console |
| Facility (RCF) is being used to access the access |
| server. The access server indicates “none available” |
| if the RCF is not in use. |
Boot Protocol | This is the protocol used to downline load the |
| software. |
Selftest Status | Shows internal information if the result of |
| at the most recent access server initialization is other |
| than: |
| Normal: Server: |
| 0000000000000000 |
| If a nonfatal error occurs during |
| server displays information about the error. The |
| following describes the information that appears in |
| the display: Selftest Status: |
| two numbers are always 00. The third number is a |
| hexadecimal representation of a bit map in which a |
| bit set indicates status as follows: |
| Bit |
| 1 |
| 2 |
| 4 |
| 8 |
| 20 |
| 40 |
| 80 |
|
|