HP NetRider manual Defining the Dialer Service, Showing the Current Dialer Service Characteristics

Defining the Dialer Service

Defining the Dialer Service

Steps

After you define the dialer script and assign the dialer script to a port, define the dialer service. A dial service is used to establish a dial-back session. Do the following:

Step Action

1Display information (characteristics, status, and counters) about currently configured dialer services and system status.

2Define or modify the dialer service using the SET/DEFINE/CHANGE DIAL SCRIPT SERVICE command.

Showing the Current Dialer Service Characteristics

Use the SHOW/LIST/MONITOR DIALER SERVICE service-nameCHARACTERISTICS command to display dialer service characteristics. These commands are similar to the SHOW SERVICES LOCAL family of commands in usage and syntax.

The examples in this section show instances of using the SHOW command only. The use of the LIST and MONITOR commands is implied, since these commands produce similar results in the screen display. They differ in the effect that they have on storage of data in VRAM and NVRAM.

Reference

For more information on command line syntax, see the Commands to Display and Change Configuration Settings section in Chapter 1.

Managing Dial Services 21-9