Using NCP to Initialize the Access Server

Using NCP to Initialize the Access ServerNCP Initialization Commands

The following table shows the NCP commands used to initialize the access server if you are on a load host:

NCP Initialization

Description

Commands

 

 

 

LOAD

Ensures that the host at which you issue the

 

command is the node that performs the load.

TRIGGER

Causes the access server to load the software

 

image from any host on the network.

 

 

The NCP LOAD and TRIGGER commands do not have any automatic warning or delay options. However, you can warn users about an impending initialization by using the access server BROADCAST command.

NCP Reference

For more information about NCP, refer to the documentation provided with the host system.

Initializing the Access Server 5-7