HP NetRider manual Showing Dialer Service Status, Example Show Dialer, Port Security Enabled

Defining the Dialer Service

Example: Show Dialer, Port Security Enabled

In this example, a user on a port with SECURITY enabled would not have access to the STATUS display since it might provide access to unlisted or sensitive phone numbers and other information received from the modem.

Local> SHOW DIALER AT_TRADESHOW CHARACTERISTICS

Dial Service:	AT_TRADESHOW
Identification:	Dial-back from tradeshow

Connections:Enabled

Ports:1,2,9-14

Phone number: 555-6766

Delay (seconds): 15

Mode:PPP

Username:None

Password:None

Local>

Showing Dialer Service Status

Use the SHOW/LIST/MONITOR DIALER SERVICE service-nameSTATUS command to display dialer service status. These commands are similar to the SHOW SERVICES LOCAL family of commands in usage and syntax.

Example: Show Dialer Status

In following example, port 10 is currently available; the last phone number it dialed was found to be busy. Ports 9 and 11 are presently in use. Port 13 is actually dialing a phone number, while port 14 is waiting for a response from the modem. When the dialer port is initialized prior to making a phone call, the Last Connection Status field is cleared.

21-10 Managing Dial Services