Checking Port Status and Counters
Field | Description |
|
|
Access | Current setting of the ACCESS port characteristic. |
| Access determines how a port can access a service node |
| or how a port can be accessed by other interactive users |
| and service nodes. Access is shown as one of the |
| following: |
| • Dynamic — Access server allows access on the port |
| to alternate between local and remote. |
| • Local — Access server allows only interactive use of |
| the port. |
| • None — Access server prevents any use of the port. |
| • Remote — Access server allows only remote |
| connections on the port. |
| Port access is specified by using the SET/DEFINE/ |
| CHANGE PORT command. |
Status | Current status of the port, which can be one of the |
| following: |
| • Connected — Port is connected to a service. |
| • Connecting — Port is attempting a connection to a |
| service. |
| • Disconnected — Session was terminated while |
| dormant. |
| • Disconnecting — Session is disconnecting from a |
| service. |
| • Idle — Port is not in use. |
| • Local Mode — Port is logged in to the access server |
| and is not connected to or connecting to a service. |
| • Locked — LOCK command was executed on the port. |
| • Signal Wait — The port failed to assert the DSR |
| signal during a signal check controlled connection |
| attempt. |
| • Sessions — Number of active sessions at the port. |
| • Current Service — Active service session or the |
| service session interrupted when the user last entered |
| local mode. |
Current Node | Node to which the current session is connected. If the |
| access is remote, this is the name of the node from which |
| the connection originated. |
|
|