Sun Microsystems 3 manual Starting the iIS Console, Using the cconsole Command

Starting the iIS Console

Starting the iIS Console

You can start the iIS Console on any node in your iPlanet UDS environment where it has been installed.

➤To start the iIS Console on Windows or Windows NT

1.Double-click the iIS Console icon.

2.Enter a valid password if one is requested (see “Setting Password Protection for iIS Console” on page 71).

➤To start the iIS Console on UNIX, OpenVMS, or Windows NT

1.Use the cconsole command (see “Using the cconsole Command” below for information).

2.Enter a valid password if one is requested (see “Setting Password Protection for iIS Console” on page 71).

When the iIS Console starts, it opens the iIS Console main window shown in Figure 3-1 on page 69.

Using the cconsole Command

As mentioned above, you start the iIS Console on command-line-based operating systems by executing the cconsole command.

The syntax of the cconsole command for most platforms:

cconsole [-fl log_flags][-fm memory_flags]

The syntax of the cconsole command for OpenVMS:

VFORTE CCONSOLE [/LOGGER=log_flags]

[/MEMORY=memory_flags]

As in all iPlanet UDS command line specifications, if you use a name that includes a space, you should enclose the name in double quotation marks.

Chapter 3 The iIS Console 67