Conductor Script Commands
The Uninstall command is always available.
The Uninstall command is normally performed to clean up the environment repository after unregistering an iIS distribution from all engines in an environment.
UnRegisterAlias
The UnRegisterAlias command unregisters the specified subprocess alias from the current engine’s registration database. For more information on aliases, see “About Aliases” on page 143.
UnRegisterAlias alias_name t
ArgumentDescription
alias_name The name of the alias (same as the process name).
The UnRegisterAlias command is available only when an engine is current, so you must first use the FindEngine Script command to set the current engine.
Use the ListRegistrations Script command to display a list of components registered with the current engine (you can filter the list for aliases). The UnRegisterAlias command will remove the alias from the registration table, however it should be replaced by a new alias if the location of a subprocess is required by a process executing on the current engine.
UnRegisterAssignmentRules
The UnRegisterAssignmentRules command deletes all assignment rules (or just the specified rule) in the specified assignment rule dictionary from the current engine’s registration database.
UnRegisterAssignmentRules dictionary_name [rule_name]
ArgumentDescription
dictionary_name The name of the assignment rule dictionary to be unregistered.
