Monitoring and Managing Process Execution
Chapter 6 Managing Process Execution 189
3. Select a queue.
4. Choose Queue > Open. The Activity Queues window displays, showing the
list of activities in the queue.
For each activity in the queue, the window displays the activity name, activity
ID, activity state, prioritizing value (value of the queue prioritizing process
attribute), and process ID.
If you want more information about an activity in the queue, you can open the
activity property inspector by selecting the activity and choosing Activity > Open
(see “Checking the Status of an Activity” on page185). If you want to change the
position of an activity in the queue, see “Reprioritizing a Queued Activity,” below.
Reprioritizing a Queued Activity
If a queued activity is not making it to the top of an activity queue because the
value of its queue prioritizing process attribute always places it toward the bottom
of its queue, you can change the value of the process attribute to reprioritize the
activity in the queue. You must be careful when performing this operation,
however, since other process logic might also depend on the value of the process
attribute.
➤To reprioritize a queued activity
1. Open the Activity Queue window for the queued activity.
See Step1 through Step 4 under “Checking the Status of an Activity Queue” on
page 188.
2. Select the activity in the activity list.