Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3 | Page 9 |
Baud Rate – 57600
Data bits – 8
Parity – None
Stop bits – 1
Flow Control – None
SSH
The default root password for SSH is digium.
3Copy the telephone image file to an FTP server if you do not have access to the image file from a public FTP server.
4Use the
root:~>
The following is an example of the
root:~>
Starting 3com Downloader root:~>
5Reboot the appliance.
Configuring Polycom Telephones
The 3Com Asterisk Appliance supports Polycom telephones as well as 3Com telephones. If you plan to use a Polycom telephone over a
1Connect the Polycom telephone to one of the LAN ports on the 3Com Asterisk Appliance.
2Use the 3Com AsteriskGUI to configure the Polycom telephone for your environment. Make sure you enter the telephone’s MAC address in the Phone Serial field of the Users page. See the 3Com Asterisk Appliance Administrator’s Guide for information about how to configure the telephone.
3Reboot the Polycom telephone and verify that it is operational.
4Connect the Polycom telephone to the WAN.
5Assign an IP address to the Polycom telephone. You can assign a static IP address or use DHCP to provide the IP address.
6Use the telephone’s
7For more information about configuring Polycom telephones, see the Polycom telephone guide for your telephone or the Polycom web site.