3Com Oven manual Supported Browsers, Fax Support, Saving Configuration Changes

Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3 Page 3

Supported Browsers

To access the 3Com AsteriskGUI, use the Firefox browser, Release 1.5 or a later release.

Note: If you exit the browser, a new browser session might not require a user to provide login information and allows full access to the 3Com AsteriskGUI. To ensure that users are required to provide a username and password each time a new browser window opens:

1From the Firefox toolbar, click Tools > Options.

2Click the Privacy icon.

3In the Private Data dialog box, enable Always clear my private data when I close Firefox.

4Click OK.

Fax Support

The 3Com Asterisk Appliance supports analog-to-analog fax transmission. Fax detection and routing are supported using analog FXS connections. Note that IP-to-analog fax transmission is not supported.

Saving Configuration Changes

The 3Com AsteriskGUI includes these controls:

ƒSave – changes are made in memory, however, they are not active or permanent

ƒActivate Changes (in the upper right of the page) – makes any changes active, however, the changes are not permanent

ƒSave Configuration (on the Home page) – changes are permanently retained after you reboot or power cycle the appliance

To ensure that you save any configuration changes permanently:

1Click Save in the 3Com AsteriskGUI page in which you have made changes.

2Click Home on the left navigation tab.

3Click Save Configuration on the Home page.

4Click Activate Changes in the upper right of the page.

Note: If you click Network > LAN, modify LAN settings, and then click Save, the changes become effective immediately. Make sure that you enter the correct IP address so that you do not lose access to the 3Com AsteriskGUI immediately after clicking the Save button.

Note: Before you remove the power cord from the 3Com Asterisk Appliance, make sure that you complete and then save your configuration changes.