Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3 | Page 8 |
Data bits – 8
Parity – None
Stop bits – 1
Flow Control – None
SSH
The default root password for SSH is digium.
b)Create or edit the custom.cfg file, which resides in the var/lib/asterisk/sounds/phoneprov_configs/ folder on the CompactFlash card.
The custom.cfg file is in xml format and specifies the
The following shows the contents of the polycom.xml file, which you can use as a template:
<?xml version="1.0"
<digitmap dialplan.1.digitmap="1xxx5xxx6xxx7xxx9xxxxxxxT91xxxxxxxxxx9[2-
9]xxxxxxxxx911[89]911[89]1800xxxxxxx[89]1855xxxxxxx[89]1866xxxxxxx[89]1877 xxxxxxx[89]1888xxxxxxx" dialplan.1.digitmap.timeOut="3"
dialplan.2.digitmap="1xxx5xxx6xxx7xxx9xxxxxxxT91xxxxxxxxxx9[2- 9]xxxxxxxxx911[89]911[89]1800xxxxxxx[89]1855xxxxxxx[89]1866xxxxxxx[89]1877 xxxxxxx[89]1888xxxxxxx" dialplan.2.digitmap.timeOut="3"
/>
</config>
The pattern explanations include:
1xxx | Internal | ext |
5xxx | Internal | ext |
6xxx | Internal | ext |
7xxx | Internal | ext |
9xxxxxxxT | Local 7 digit | |
91xxxxxxxxxx | Long distance | |
Local 10 | digit | |
911 | Emergency 911 | |
[89]911 | Emergency 911 or 811 | |
[89]1800xxxxxxx | Toll free |
|
[89]1855xxxxxxx | Toll free |
|
[89]1866xxxxxxx | Toll free |
|
[89]1877xxxxxxx | Toll free |
|
[89]1888xxxxxxx | Toll free |
|
Updating the Telephone Image Files
If you have been instructed to update the 3Com telephone image files, follow these steps.
1Make sure that you have updated the bootloader image (see Updating the Bootloader Image) and the 3Com Asterisk Appliance firmware image (see Updating the 3Com Asterisk Appliance Firmware Image).
2Establish a connection from your PC to the appliance using one of the following:
Terminal emulation software (such as HyperTerminal), using an adapter to connect the serial port on the 3Com Asterisk Appliance to the serial port on your PC.
The terminal settings are: