Framing modes are, To Cisco Hdlc | Cisco Systems ONS 15310-CL

Chapter 6 Configuring POS on the ML-Series Card

Configuring the POS Interface

	Command	Purpose
Step 3
Step 3	Router(config-if)# [no] pos mode gfp	Sets the framing mode employed by the ONS
	[fcs-disabled]	Ethernet card for framing and encapsulating data
		packets onto the SONET transport layer. Valid
		framing modes are:
		• HDLC—A common mechanism employed in
		framing data packets for SONET. HDLC is
		not a keyword choice in the command. The no
		form of the command sets the framing mode
		to Cisco HDLC.
		• GFP (default)—The ML-Series card supports
		the frame mapped version of generic framing
		procedure (GFP-F).
		GFP-F with a 32-bit CRC, also referred to as
		frame check sequence (FCS), is enabled by
		default. The optional FCS-disabled keyword
		disables the GFP-F 32-bit FCS.
		The FCS-disabled keyword is not available when
		setting the framing mode to Cisco HDLC.
		Note CRC-under-HDLC framing is restricted to
		a 32-bit size and cannot be disabled.
		Note The GFP-F FCS is compliant with ITU-T
		G.7041/Y.1303
Step 4
Step 4	Router(config-if)# no shutdown	Restarts the shutdown interface.
Step 5
Step 5	Router(config)# end	Returns to privileged EXEC mode.
Step 6
Step 6	Router# copy running-config startup-config	(Optional) Saves configuration changes to
		NVRAM.

Configuring POS Interface Encapsulation Type Under GFP-F Framing

To configure the encapsulation type for a ML-Series card, perform the following steps beginning in global configuration mode:

	Command	Purpose
Step 1
Step 1	Router(config)# interface pos number	Activates interface configuration mode to
		configure the POS interface.
Step 2
Step 2	Router(config-if)# shutdown	Manually shuts down the interface. Encapsulation
		and framing mode changes on POS ports are
		allowed only when the interface is shut down
		(ADMIN_DOWN).

Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2

	78-19415-01	6-5

ONS 15310-CL, ONS 15310-MA, Cisco ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-CL manual Sets the framing mode employed by the ONS, Framing modes are

Models: ONS 15310-CL ONS 15310-MA Cisco ONS 15310-MA

Command

Sets the framing mode employed by the ONS

Ethernet card for framing and encapsulating data

packets onto the SONET transport layer. Valid

framing modes are:

• HDLC—A common mechanism employed in

framing data packets for SONET. HDLC is

not a keyword choice in the command. The no

form of the command sets the framing mode

to Cisco HDLC.

• GFP (default)—The ML-Series card supports

the frame mapped version of generic framing

procedure (GFP-F).

GFP-F with a 32-bit CRC, also referred to as

frame check sequence (FCS), is enabled by

default. The optional FCS-disabled keyword

disables the GFP-F 32-bit FCS.

The FCS-disabled keyword is not available when

setting the framing mode to Cisco HDLC.

a 32-bit size and cannot be disabled.

G.7041/Y.1303

NVRAM.

Command

and framing mode changes on POS ports are

allowed only when the interface is shut down

(ADMIN_DOWN).

ONS 15310-CL, ONS 15310-MA, Cisco ONS 15310-MA specifications