Appendix A Command Reference for the ML-Series Card

[non] pos trigger defects condition

[non] pos trigger defects condition

Use this command to specify which conditions cause the associated POS link state to change. These conditions are soaked/cleared using the delay specified in the pos trigger delay command. Use the no form of the command to disable triggering on a specific condition.

Syntax Description

Defaults

Parameter

Description

condition

The SONET/SDH condition that causes the link state change. The

 

conditions are as follows:

 

all—All link down alarm failures (default)

 

ber_sd_b3—PBIP BER in excess of SD threshold failure

 

ber_sf_b3—PBIP BER in excess of SF threshold failure

 

encap—Path signal label encapsulation mismatch failure

 

pais—Path alarm indication signal failure

 

plop—Path loss of pointer failure

 

ppdi—Path payload defect indication failure

 

pplm—Payload label mismatch path

 

prdi—Path remote defect indication failure

 

ptim—Path trace indicator mismatch failure

 

puneq—Path label equivalent to zero failure

 

 

The default is to report all conditions except ber_sd_b3. For a list of all conditions, see the list in the above description.

Command Modes Interface configuration mode (POS only)

Usage Guidelines This value is normally configured to match the setting on the peer PTE.

Examples

Gateway(config)# int pos0

 

Gateway(config-if)#pos trigger defects all

Related Commands pos trigger delay

Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2

 

78-19415-01

A-9

 

Page 252 Page 254
Page 253
Image 253
Cisco Systems ONS 15310-MA manual Non pos trigger defects condition, Syntax Description Defaults, Gatewayconfig# int pos0
Page 252 Page 254

ONS 15310-CL, ONS 15310-MA, Cisco ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.
Top Page Image Contents