Cisco Systems Cisco ONS 15310-MA, ONS 15310-CL manual MLSeries# show ons alarm failure eqpt

Appendix A Command Reference for the ML-Series Card

show ons alarm failure {[eqpt port [port-number] sts [sts-number] vcg [vcg-number] vt]}

show ons alarm failure {[eqpt port [port-number] sts [sts-number] vcg [vcg-number] vt]}

This command displays all failures for the ML-Series card with no keyword (default) or failures for the level specified by the keyword.

Syntax Description

Defaults

Command Modes

Usage Guidelines

Examples

Parameter	Description
eqpt	Specifies hardware-related.
port	Specifies the physical interface level. Optional port-numberspecifies a particular
	physical interface.
sts	Specifies the SONET circuit level. Optional sts-numberspecifies a particular SONET
	circuit.
vcg	Specifies the VCAT circuit group level. Optional vcg-numberspecifies a particular VCAT
	group.
vt	Not valid.
N/A

Privileged EXEC

This command displays the set of active failures for the specified layer and the possible set of failures that can be set.

The following example shows the command and output for the ML-Series alarm failure information at the equipment level.

ML_Series# show ons alarm failure eqpt

Equipment Alarms

Active: RUNCFG-SAVENEED

The following example shows the command and output for the ML-Series alarm failure information at the port level.

ML-Series#show ons alarm failure port

Port Alarms
POS0	Active: None
POS1	Active: None
FastEthernet0		Active: None
FastEthernet1		Active: None
FastEthernet2		Active: None
FastEthernet3		Active: None
FastEthernet4		Active: None
FastEthernet5		Active: None
FastEthernet6		Active: None
FastEthernet7		Active: None

Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2

78-19415-01 A-19