Show ons alarm

Appendix A Command Reference for the ML-Series Card

show ons alarm

Use this command to display all the active alarms on the card.

Syntax Description This command has no arguments or keywords.

Defaults	N/A

Command Modes	Privileged EXEC

Usage Guidelines	This command can be used to help diagnose and isolate card problems.

Examples	ML_Series# show ons alarm
	Equipment Alarms
	Active: CONTBUS-IO-A CTNEQPT-PBWORK
	Port Alarms


POS0	Active: None
POS1	Active: None
FastEthernet0		Active: None
FastEthernet1		Active: None
FastEthernet2		Active: None
FastEthernet3		Active: None
FastEthernet4		Active: None
FastEthernet5		Active: None
FastEthernet6		Active: None
FastEthernet7		Active: None
FastEthernet8		Active: None
FastEthernet9		Active: None

FastEthernet10 Active: None

FastEthernet11 Active: None

POS0

Active Alarms : None

Demoted Alarms: None

POS1 VCG State: VCG_NORMAL

VCAT Group

Active Alarms : None

Demoted Alarms: None

Member 0

Active Alarms : None

Demoted Alarms: None

Member 1

Active Alarms : None

Demoted Alarms: None

Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2

	78-19415-01	A-15

Page 259

Image 259

Cisco Systems ONS 15310-CL, Cisco ONS 15310-MA manual Show ons alarm, MLSeries# show ons alarm

ONS 15310-CL, ONS 15310-MA, Cisco ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Contents

Text Part Number Americas HeadquartersPage Iii N T E N T S Exit Getting Help Bridge ID, Switch Priority, and Extended System ID Ieee 802.1Q Tunneling and Compatibility with Other Features Vii Configuring Encapsulation over EtherChannel or POS Channel Viii Monitoring and Verifying QoS Configuration RPR QoS Displaying the Radius Configuration CE-100T-8 Loopback, J1 Path Trace, and Sonet Alarms Xii Providing Data to Your Technical Support Representative C-3 12-12 11-511-6 12-11 17-5 Xiv17-18 12-5 10-512-3 12-4 Xvi Date PrefaceRevision History This section provides the following information Xviii Document ObjectivesAudience Related Documentation Italic Document ConventionsConvention Application Boldface Warnung Wichtige Sicherheitshinweise Bewaar Deze Instructies Aviso Instruções Importantes DE Segurança Avvertenza Importanti Istruzioni Sulla SicurezzaXxi Xxii Xxiii GEM Disse Anvisninger Xxiv Xxv Where to Find Safety and Warning InformationObtaining Optical Networking Information Cisco Optical Networking Product Documentation CD-ROM Xxvi ML-Series Card Description Overview of the ML-Series Card IRB ML-Series Feature List Bundling the two POS ports LEX encapsulation only Cisco IOS Release 12.228SV Key ML-Series FeaturesCisco IOS GFP-F Framing Rmon Link Aggregation FEC and POS TL1 Refresh CTC Operations on the ML-Series CardDisplaying ML-Series POS Statistics in CTC ML-Series POS Statistics Fields and Buttons Button Description Displaying ML-Series Ethernet Statistics in CTCML-Series Ethernet Statistics Fields and Buttons CTC Displaying J1 Path Trace Displaying Sonet AlarmsProvisioning Sonet Circuits Page 78-19415-01 Hardware Installation Initial Configuration of the ML-Series CardCisco IOS on the ML-Series Card Telnetting to the Node IP Address and Slot Number Opening a Cisco IOS Session Using CTC CTC Node View Showing IP Address Telnetting to a Management Port RJ-11 Pin RJ-45 Pin Connecting a PC or Terminal to the Console PortML-Series IOS CLI Console Port RJ-11 to RJ-45 Console Cable Adapter Startup Configuration File Router enable PasswordsConfiguring the Management Port Command Purpose Nvram Configuring the Hostname Click the IOS startup config button Loading a Cisco IOS Startup Configuration File Through CTC Database Restore of the Startup Configuration File Cisco IOS Command Modes Enter the line console Mode What You Use It For How to Access PromptEnter the configure terminal Interface fastethernet 0 for Getting Help Using the Command ModesRouter# configure ? Exit 78-19415-01 Understanding Bridging Configuring Bridging on the ML-Series Card Configuring Bridging Bridge irb Bridge 1 protocol ieee Example 4-1 MLSeries a ConfigurationExample 4-2 MLSeries B Configuration Monitoring and Verifying Bridging To specific bridge groups For any statically configured forwarding entriesDisplays detailed information about spanning tree Bridge-group-number restricts the spanning tree informationPage 78-19415-01 General Interface Guidelines Configuring Interfaces on the ML-Series CardMAC Addresses MLSeries# show interfaces fastethernet Interface Port ID MLSeries# configure terminal Basic Interface ConfigurationMLSeriesconfig# interface fastethernet number Configuring the Fast Ethernet Interfaces Basic Fast Ethernet and POS Interface Configuration Configuring the POS Interfaces Hdlc Monitoring Operations on the Fast Ethernet Interfaces Example 5-3 show controller Command Output Ucode drops Example 5-4 show run interface Command OutputBuilding configuration Current configuration 222 bytes Bridge-group 2 spanning-disabled end Understanding POS on the ML-Series Card Configuring POS on the ML-Series CardAvailable Circuit Sizes and Combinations Mbps STS-1 STS-1-1v STS-1-2v J1 Path Trace, and Sonet AlarmsLcas Support Ccat High Order Vcat High Order PPP/BCP Encapsulations LEX default Cisco HdlcCRC Sizes Bit default None FCS disabled GFP-F Framing Hdlc Framing Allowed only when the interface is shut down Configuring the POS InterfaceConfiguring POS Interface Framing Mode Framing mode changes on POS ports are GFP default-The ML-Series card supports Sets the framing mode employed by the ONSNot a keyword choice in the command. The no Form of the command sets the framing mode Cisco-EoS-LEX, special encapsulation for Sonet AlarmsLex-default LAN extension Hdlc-Cisco Hdlc Configuring Sonet Delay Triggers Configuring Sonet AlarmsAll -All alarms/signals Monitoring and Verifying POS Input drop packets CCAT/VCAT info not available yetInput Packets Input Short packets ?? pre-encap bytes 283 78-19415-01 STP Features Configuring STP and Rstp on the ML-Series CardThese sections describe how the spanning-tree features work Supported STP Instances STP OverviewBridge Protocol Data Units Election of the Root Switch Bit Bridge ID, Switch Priority, and Extended System IDSpanning-Tree Timers Switch Priority Value Spanning-Tree Interface States Creating the Spanning-Tree Topology Spanning-Tree Interface States Blocking State Forwarding State Disabled StateListening State Learning State Learns addresses Does not receive BPDUs Spanning-Tree Address ManagementSTP and Ieee 802.1Q Trunks Spanning Tree and Redundant Connectivity Accelerated Aging to Retain Connectivity Rstp FeaturesSupported Rstp Instances Is Port Included Port Roles and the Active TopologyPort State Comparison Rapid Convergence Proposal and Agreement Handshaking for Rapid Convergence Synchronization of Port Roles Bit Function Bridge Protocol Data Unit Format and ProcessingRstp Bpdu Flags Processing Superior Bpdu Information Topology ChangesProcessing Inferior Bpdu Information Interoperability with Ieee 802.1D STP Configuring STP and Rstp Features Feature Default Setting Default STP and Rstp ConfigurationDisabling STP and Rstp Configuring the Port Priority Configuring the Root SwitchPort-channel-number Configuring the Switch Priority of a Bridge Group Configuring the Path Cost Configuring the Hello Time Configuring the Maximum-Aging Time for a Bridge Group Configuring the Forwarding-Delay Time for a Bridge GroupVerifying and Monitoring STP and Rstp Status Displays brief summary of STP or Rstp information Commands for Displaying Spanning-Tree StatusExample 7-1 show spanning-tree Commands Displays detailed STP or Rstp information 78-19415-01 Understanding VLANs Configuring VLANs on the ML-Series Card Configuring Ieee 802.1Q Vlan Encapsulation MLSeriesconfig-subif# end Ieee 802.1Q Vlan ConfigurationReturns to privileged Exec mode Optional Saves your configuration changes to No ip routing Bridging Ieee 802.1Q VLANs Bridging Example 8-2 Output for show vlans CommandMonitoring and Verifying Vlan Operation ML-Series#show vlans 78-19415-01 Understanding Ieee 802.1Q Tunneling Ieee 802.1Q Tunnel Ports in a Service-Provider Network FCS Ieee 802.1Q Tunneling and Compatibility with Other Features Configuring Ieee 802.1Q TunnelingConfiguring an Ieee 802.1Q Tunneling Port Ieee 802.1Q Example Untagged will be switched based on this bridge-group. OtherDisplays the tunnel ports on the switch Example 9-1 MLSeries a Configuration Example 9-2 MLSeries B Configuration VLAN-Transparent Services VLAN-Specific ServicesVLAN-Transparent Service Versus VLAN-Specific Services Example 9-3applies to ML-Series card a Example 9-3 ML-Series Card a ConfigurationInterface FastEthernet0 Example 9-5applies to ML-Series card C Example 9-4 ML-Series Card B ConfigurationExample 9-5 ML-Series Card C Configuration Example 9-4applies to ML-Series card B Understanding Layer 2 Protocol Tunneling Configuring Layer 2 Protocol TunnelingNo ip address Default Layer 2 Protocol Tunneling Configuration Default Layer 2 Protocol Tunneling ConfigurationLayer 2 Protocol Tunneling Configuration Guidelines 2shows the default Layer 2 protocol tunneling configuration Configuring Layer 2 Tunneling on a Port Monitoring and Verifying Tunneling Status Configuring Layer 2 Tunneling Per-VLAN Understanding Link Aggregation Configuring Link Aggregation on the ML-Series Card10-1 Configuring Fast EtherChannel Configuring Link Aggregation10-2 Cisco IOS Configuration Fundamentals Configuration Guide EtherChannel Configuration Example10-3 10-4 Configuring POS Channel 10-5 POS Channel Configuration Example Understanding Encapsulation over FEC or POS Channel Configuring Encapsulation over EtherChannel or POS Channel10-6 Your requirements Configuration mode and enable otherSupported interface commands to meet Encapsulation over EtherChannel Example Hostname MLSeriesB Bridge irb Example 10-6 MLSeries B ConfigurationMonitoring and Verifying EtherChannel and POS 10-8 10-9 Example 10-7 show interfaces port-channel CommandMLSeries# show int port-channel 10-10 11-1 Configuring IRB on the ML-Series CardCisco IOS Command Reference publication Understanding Integrated Routing and Bridging 11-2 Configuring IRB 11-3 IRB Configuration Example 11-4 Example 11-1 Configuring MLSeries aExample 11-2 Configuring MLSeries B Monitoring and Verifying IRB 11-5 11-6 Field Description 12-1 Configuring Quality of Service on the ML-Series Card 12-2 IP Precedence and Differentiated Services Code PointUnderstanding QoS Priority Mechanism in IP and Ethernet 12-3 Ethernet CoS Classification ML-Series QoS12-4 Marking and Discarding with a Policer Policing12-5 Scheduling Queuing12-6 12-7 Control Packets and L2 Tunneled Protocols 12-8 Egress Priority MarkingIngress Priority Marking QinQ Implementation Flow Control Pause and QoS QoS on RPR12-9 Creating a Traffic Class Configuring QoS12-10 12-11 Creating a Traffic Policy Maximum of 40 alphanumeric characters Syntax of the class command isPolicy-map policy-nameno policy-map policy-name Class class-map-name no class class-map-name 12-13 12-14 Command 12-15 Attaching a Traffic Policy to an Interface Traffic class Monitoring and Verifying QoS ConfigurationConfiguring CoS-Based QoS Displays all configured traffic policies 12-17 QoS Configuration Examples Traffic Policy Created Example Traffic Classes Defined Example12-18 Match spr1 Interface Example Example 12-6 Class Map Match All Command ExampleExample 12-7 Class Map Match Any Command Example Example 12-8 Class Map SPR Interface Command Example 12-20 Example 12-9 ML-Series VoIP CommandsML-Series VoIP Example ML-Series Policing Example ML-Series CoS-Based QoS Example Example 12-10 ML-Series Policing CommandsRouterconfig# class-map match-all policer Routerconfig# policy-map policef0 12-22 MLSeriesBconfig# cos commit 12-23 Default Multicast QoS Multicast Priority Queuing QoS Restrictions Configuring Multicast Priority Queuing QoS12-24 12-25 ML-Series Egress Bandwidth Example QoS not Configured on Egress12-26 12-27 Crc Service-policy output policyegressbandwidthBandwidth 12-28 Understanding CoS-Based Packet StatisticsFast Ethernet Statistics Collected Interface Subinterface Vlan 12-29 Configuring CoS-Based Packet Statistics MLSeries# show interface pos0 cos Understanding IP SLA12-30 MLSeries# show interface fastethernet 0 cos IP SLA Restrictions on the ML-Series IP SLA on the ML-Series12-31 12-32 13-1 Understanding the SDM Lookup Type Configuring SDMDefault Size Understanding SDM Regions Monitoring and Verifying SDM Configuring SDM RegionsConfiguring Access Control List Size in Tcam Task Command 13-4 Access List 300 64-bitMAC Addr 8192 64-bit 14-1 Configuring Access Control Lists on ML-Series CardUnderstanding ACLs ML-Series ACL Support 14-2 IP ACLsNamed IP ACLs User Guidelines Creating Numbered Standard and Extended IP ACLs Creating IP ACLs14-3 14-4 Creating Named Standard IP ACLsCreating Named Extended IP ACLs Control Plane Only Applying the ACL to an Interface Applying ACL to Interface Controls access to an interfaceModifying ACL Tcam Size 14-5 14-6 Understanding RPR Configuring Resilient Packet Ring on ML-Series Card15-1 Packet Handling Operations Role of Sonet Circuits15-2 15-3 Ring Wrapping 15-4 RPR Framing Process RPR Frame for ML-Series Card DA-MAC and 0x00 for Unknown DA-MACRPR as the source 15-5 CTM and RPR Configuring RPRMAC Address and Vlan Support RPR QoS CTC Circuit Configuration Example for RPR Configuring CTC Circuits for RPR15-7 Three-Node RPR Example 15-8 15-9 15-10 Configures a station ID. The user must configure aOptional Sets the RPR ring wrap mode to either wrap Immediate delayed 15-11 Assigning the ML-Series Card POS Ports to the SPR Interface 15-12 15-13 15-14 RPR Cisco IOS Configuration ExampleExample 15-1 SPR Station-ID 1 Configuration Example 15-2 SPR Station-ID 2 Configuration Example 15-3 SPR Station-ID 3 Configuration CRC Threshold Configuration and Detection15-15 Example 15-5 Example of show run interface spr 1 Output Monitoring and Verifying RPR15-16 Example 15-4 Example of show interface spr 1 Output 15-17 Add an ML-Series Card into an RPR Three-Node RPR After the Addition 15-18 15-19 Adding an ML-Series Card into an RPR 15-20 Cisco ONS 15454 Procedure Guide 15-21 Stop. You have completed this procedureDelete an ML-Series Card from an RPR Endpoint of the second newly created circuit 10 Two-Node RPR After the Deletion 15-22 15-23 Deleting an ML-Series Card from an RPR 15-24 Routerconfig-if# no Cisco Proprietary RPR Shortest Path Cisco Proprietary RPR KeepAliveRedundant Interconnect 15-26 Understanding Security Configuring Security for the ML-Series Card16-1 Understanding SSH Secure Login on the ML-Series CardDisabling the Console Port on the ML-Series Card Secure Shell on the ML-Series Card This section has configuration information Configuring SSHConfiguration Guidelines Setting Up the ML-Series Card to Run SSH 16-4 Configuring the SSH Server Displaying the SSH Configuration and Status16-5 Radius on the ML-Series Card Radius Relay Mode16-6 Configuring Radius Relay Mode Radius Stand Alone Mode16-7 Understanding Radius Configuring Radius16-8 Identifying the Radius Server Host Default Radius Configuration16-9 16-10 Switchconfig# radius-server host host1 Configuring AAA Login AuthenticationRouter# configure terminal Enter global configuration mode Router config# aaa new-model Enable AAA Router config# line console tty Router config# aaa authentication16-12 16-13 Router config# end Return to privileged Exec modeRouter# show running-config Verify your entries Defining AAA Server Groups Router # show running-config Router config# aaa group serverRouter config-sg-radius# server Router config-sg-radius# end 16-15 Switchconfig# aaa new-modelSwitchconfig-sg-radius# exit Radius 16-16 Starting Radius Accounting Configuring Settings for All Radius Servers Configuring a nas-ip-address in the Radius Packet16-17 16-18 Default is 0 the range is 1 to 1440 minutesDeadtime minutes Marked as dead, the skipping will not take place 16-19 Send accounting authenticationRouter config# radius-server host hostname Ip-addressnon-standard 16-20 Displaying the Radius Configuration 17-1 CE-Series Ethernet CardsCE-100T-8 Ethernet Card Section topics include Sonet CE-100T-8 Ethernet FeaturesCE-100T-8 Overview Autonegotiation, Flow Control, and Frame Buffering 17-3 Ethernet Link Integrity Support 17-4 Enhanced State Model for Ethernet and Sonet Ports IP ToS Priority Queue Mappings Default NoneIeee 802.1Q CoS and IP ToS Queuing 17-5 Statistics and Counters Rmon and Snmp Support17-6 Number of STS-3c Circuits Maximum Number of STS-1 Circuits CE-100T-8 Sonet Circuits and FeaturesAvailable Circuit Sizes and Combinations Ccat High Order Vcat High Order Vcat Low Order 17-8 CE-100T-8 STS/VT Allocation TabMaximum Number of STS-1-2v Circuits 7x=1-12 6x=1-14 5x=1-16 =1-21 CE-100T-8 STS/VT Allocation Tab 17-9 CE-100T-8 POS Encapsulation, Framing, and CRC CE-100T-8 Vcat Characteristics17-10 17-11 CE-100T-8 Loopback, J1 Path Trace, and Sonet Alarms CE-MR-6 Overview CE-MR-6 Ethernet Card17-12 Cisco ONS 15310 Procedure Guide CE-MR-6 Ethernet Features17-13 Flow Control 17-14 17-15 Ethernet Drop and Continue Circuit 17-16 Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual 17-17 17-18 17-19 Snmp MIBs Supported Supported Cross-connects CE-MR-6 Circuits and Features17-20 Minimum Sonet Circuit Sizes for Ethernet Speeds Vcat High Order Vcat Low Order17-21 Supported Sonet Circuit Sizes of CE-MR-6 on ONS 17-22 STS Circuit Combinations VT Circuits CE-MR-6 Pool Allocation CE-MR-6 Vcat Characteristics17-23 CE-MR-6 POS Encapsulation, Framing, and CRC CE-MR-6 Loopback, J1 Path Trace, and Sonet Alarms17-24 17-25 17-26 Command Reference for the ML-Series Card Rstp Related Commands bridge-groupDrpri-rstp Ieee Clear counters Related Commands show interfaceRouter# clear counters Clock timezone Syntax Description Defaults Command Modes Usage GuidelinesNo clock auto Clock summertime Interface spr Defaults Command Modes MLSeriesconfig-if # pos mode gfp fcs-disable No pos mode gfp fcs-disabledRelated Commands shutdown MLSeriesconfig # int pos0 MLSeriesconfig-if # shutdown No pos pdi holdoff time Pos trigger defects No pos report alarmRelated Commands Gatewayconfig# int pos0 Gatewayconfig-if# pos report all Non pos trigger defects condition Syntax Description DefaultsRelated Commands pos trigger delay Gatewayconfig# int pos0 Command is 50 milliseconds No pos trigger delay timeTime Delay time in milliseconds, 200 to Default value is 200 milliseconds Immediate No pos vcat defect immediate delayedDelayed Parameter Description MLSeries# show controller pos 0 Interface POS0 Show controller pos interface-numberdetails Related Commands show interface pos Clear counters Related Commands show controller pos Clear counters Use this command to display the status of the POS interfaceShow interface pos interface-number MLSeries# show ons alarm Show ons alarm 78-19415-01 Vcg EqptPort Sts STS Defects MLSeries# show ons alarm defect sts Equipment Alarms Active RUNCFG-SAVENEED MLSeries# show ons alarm failure eqptML-Series#show ons alarm failure port MLSeries# show ons alarm failure sts Interface spr Spr station-id Spr wrap Assigns the POS interface to the SPR interface Port-based Related Commands interface sprNo spr load-balance auto port-based Auto Spr-intf-id Spr wrap Configures a station IDDefaultsN/A Following example sets an ML-Series card SPR station ID to Interface spr Spr-intf-id Spr station-id Spr wrap immediate delayedWraps RPR traffic after the carrier delay time expires MLSeriesconfig-if# spr wrap delayed Unsupported Privileged Exec Commands Unsupported CLI Commands for the ML-Series CardUnsupported Global Configuration Commands 78-19415-01 Unsupported POS Interface Configuration Commands Unsupported FastEthernet Interface Configuration Commands Unsupported Port-Channel Interface Configuration Commands Rate-limit Random-detect Timeout Tx-ring-limit Unsupported BVI Interface Configuration Commands Gathering Information About Your Internetwork Using Technical Support Getting the Data from Your ML-Series Card Providing Data to Your Technical Support Representative 78-19415-01 IN-1 CE-MR-6 IS,AINSIN-2 IN-3 IN-4 CRC IN-5 DscpRstp Rstp STP GFP-F See also framingIN-6 IN-7 Lcas IN-8 RPR SnmpTL1 RPR IN-9 POS Rmon Radius RPRIN-10 SDM IN-12 SSHSee also Bpdu Accelerated aging Blocking state Tcam IN-13 Vcat IN-14

Cisco Systems ONS 15310-MA, ONS 15310-CL manual Show ons alarm, MLSeries# show ons alarm

Models: ONS 15310-CL ONS 15310-MA Cisco ONS 15310-MA

Defaults

ML_Series# show ons alarm

POS0

POS1

POS0

ONS 15310-CL, ONS 15310-MA, Cisco ONS 15310-MA specifications