CE-MR-6 Circuits and Features, 17-20 | Cisco Systems ONS 15310-MA

Chapter 17 CE-Series Ethernet Cards

CE-MR-6 Ethernet Card

•RFC2233-MIB

–ifInUcastPkts

–ifOutUcastPkts

–ifInMulticastPkts

–ifInBroadcastPkts

–ifInDiscards

–ifInOctets

–ifOutOctets

–ifInErrors

•RFC2358-MIB

–dot3StatsFCSErrors

–dot3StatsSingleCollisionFrames

–dot3StatsFrameTooLong

Statistics and Counters

The CE-MR-6 has a full range of Ethernet and POS statistics information under Performance > Ether Ports or Performance > POS Ports.

Supported Cross-connects

There is no restriction on the number of CE-MR-6 cards that could be added in one chassis or the slot where the CE-MR-6 cards can be placed. CE-MR-6 card is supported with XC cards.

CE-MR-6 Circuits and Features

The CE-MR-6 card has 6 POS ports, numbered 1 through 6, which can be managed via CTC or TL1. Each POS port is statically mapped to a matching Ethernet port. By clicking the card-level Provisioning > POS Ports tab, the user can configure the Administrative State, and Encapsulation Type. By clicking the card-level Performance > POS Ports tab, the user can view the statistics, utilization, and history of the POS ports.

Available Circuit Sizes and Combinations

Each POS port terminates an independent CCAT or VCAT circuit. The circuit is created for these ports through CTC or TL1 in the same manner as a circuit for a non-Ethernet line card.

Note If a CE-MR-6 card with a 1 Gbps SFP is installed and cross connected to another card that supports only

10or 100 Mbps, (for example, CE-100T-8 cards in the ONS 15310-MA) packet loss may occur if the SONET circuit between the two cards is more than 100 Mbps. In the CE-100T-8 example, a STS-1-2v circuit is errorless; however, if a STS-1-3v is used there will be a packet loss in the CE-MR-6 to CE-100T-8 direction.

Table 17-10show the circuit sizes available for CE-MR-6 on ONS 15310.

	Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2
17-20	78-19415-01

ONS 15310-CL, ONS 15310-MA, Cisco ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-MA manual CE-MR-6 Circuits and Features, Supported Cross-connects, 17-20

Models: ONS 15310-CL ONS 15310-MA Cisco ONS 15310-MA