3Com MSR 50 Display fr inarp-info, Display fr interface, Related command fr inarp Example, 373

						373
		Table 40 Description on the fields of the display fr dlci-switch command
		Field		Description
		Frame relay switch statistics		The statistics of frame relay switch
		Status		The status of frame relay switching function
		Interface(Dlci) <---------->		Input interface and its DLCI, output interface and its DLCI.
		Interface(Dlci)
display fr inarp-info
Syntax		display fr inarp-info [ interface interface-typeinterface-number]
View		Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
		number. It can only be a main interface.
Description		Use the display fr inarp-infocommand to display statistics about frame relay
		inverse ARP (INARP) packets, including requests and replies, for the specified or all
		interfaces.
		You may use this command to diagnose whether INARP is operating normally.
Related command: fr inarp.
Example		# Display statistics about frame relay INARP packets.
		<Sysname> display fr inarp-info
		Frame relay InverseARP		statistics for interface Serial2/0 (DTE)
		In ARP request	Out ARP reply		Out ARP request	In ARP reply
	0		0		1	1
		Table 41 Description on the fields of the display fr inarp-info command
		Field			Description

Frame relay InverseARP statistics for interface Serial2/0 (DTE)

In ARP request

Out ARP reply

Out ARP request

In ARP reply

Display frame relay INARP packet statistics of the interface

Received ARP requests

Transmitted ARP replies

Transmitted ARP requests

Received ARP replies

display fr interface

Syntax display fr interface [ interface-type { interface-number interface-number.subnumber } ]

View Any view