3Com MSR 50, MSR 30 manual Fr map ppp, Fr switch, Related command interface virtual-templateon, 397

397

fr map ppp

Syntax fr map ppp dlci-numberinterface virtual-template interface-number

undo fr map ppp [ dlci-number]

View Interface view

Parameter dlci-number: Specific DLCI number in the range of 16 to 1007.

virtual-templateinterface-number: Virtual template interface number in the range of 0 to 1023.

Description Use the fr map ppp command to map the frame relay DLCI (corresponds to an Frame Relay PVC) to a PPP link, so the PPPoFR link is established, and thus PPP packets can be sent/received on FR PVC. The configuration parameter of this PPP link is up to the parameters configured on the interface specified by interface virtual-templateinterface-number.

Use the undo map ppp command to cancel this map, and thus eliminates this

PPPoFR link.

Related command: interface virtual-templateon page 1759.

Example # Map DLCI 100 to PPP and establish PPPoFR link on Serial 2/0.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] fr map ppp 100 interface virtual-template 1

fr switch

Syntax fr switch name [ interface interface-type interface-number dlci dlci1 interface interface-type interface-number dlci dlci2 ]

undo fr switch name

View System view

Parameter name: Name of a PVC used for frame relay switching, a string of 1 to 30 characters.

interface interface-type interface-number dlci dlci1: DLCI number at one end of PVC as well as the type and number of its interface.

interface interface-type interface-number dlci dlci2: DLCI number at the peer end of PVC as well as the type and number of its interface.