Sunfire B1600 manual Address Table Commands, Console#show interfaces switchport ethernet NETP7

Example

This example shows the configuration setting for Ethernet port NETP7.

Console#show interfaces switchport ethernet NETP7

Information of NETP7

Broadcast threshold: Enabled, 256 packets/second

Lacp status: Enabled

VLAN membership mode: Hybrid

Ingress rule: Disabled

Acceptable frame type: All frames

Native VLAN: 1

Priority for untagged traffic: 0

Gvrp status: Enabled

Allowed Vlan: 1(u),

Forbidden Vlan: 2,

Console#

4.3.9Address Table Commands

These commands are used to configure the address table for filtering specified addresses, displaying current entries, clearing the table, or setting the aging time.

TABLE 4-14Address Table Commands

Command	Function	Mode	Page
mac-address-table	Maps a static address to a port in a VLAN	GC	4-99
static
clear mac-address-	Removes any learned entries from the forwarding	PE	4-100
table dynamic	database
show mac-address-	Displays entries in the bridge-forwarding database	PE	4-100
table
mac-address-table	Sets the aging time of the address table	GC	4-101
aging-time
show mac-address-	Shows the aging time for the address table	PE	4-102
table aging-time

4-98Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003