Example

Console(config)#interface ethernet SNP5

Console(config-if)#spanning-tree edge-port

Console(config-if)#

4.3.11.12spanning-tree protocol-migration

Use this command to re-check the appropriate BPDU format to send on the selected interface.

Syntax

spanning-tree protocol-migration interface

interface

ethernet port-name

port-name– down link: SNP0-15; up link: NETP0-7; mgt: NETMGT

port-channel channel-id(Range: 1-6)

Command Mode

Privileged Exec

Command Usage

If at any time the switch detects STP BPDUs, including Configuration or Topology Change Notification BPDUs, it will automatically set the selected interface to forced STP-compatible mode. However, you can also use the spanning-treeprotocol-migrationcommand at any time to manually re-check the appropriate BPDU format to send on the selected interfaces (RSTP or STP- compatible).

Example

Console(config)#interface ethernet SNP5

Console(config-if)#spanning-tree protocol-migration

Console(config-if)#

4-116Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003

Page 314
Image 314
Sunfire B1600 manual Spanning-tree protocol-migration