Syntax

lacp

no lacp

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet)

Command Usage

The ports on both ends of an aggregated link must be configured for full duplex, either by forced mode or auto-negotiation.

An aggregated link formed with another switch using LACP will automatically be assigned the next available port-channel ID.

If the target switch has also enabled LACP on the connected ports, the aggregated link will be activated automatically.

If more than four ports attached to the same target switch have LACP enabled, the additional ports are placed in standby mode, and are only enabled if one of the active links fails.

Chapter 4 Command-Line Reference 4-169

Page 367
Image 367
Sunfire B1600 manual Lacp No lacp