Sunfire B1600 Gvrp and Bridge Extension Commands, Vlan id, 18GVRP and Bridge Extension Commands

Example

The following example shows how to display information for VLAN 1:

Console#show	vlan id 1
VLAN Type	Name	Status	Ports/Channel groups
---- ------- ---------------- --------- ----------------------
1 Static	DefaultVlan	Active	SNP0	SNP1	SNP2	SNP3	SNP4
			SNP5	SNP6	SNP7	SNP8	SNP9
		SNP10		SNP11	SNP12	SNP13	SNP14
		SNP15		NETP0	NETP1	NETP2	NETP3

			NETP4 NETP5	NETP6	NETP7
2 Static	MgtVlan	Active	NETMGT
Console#

4.3.13GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

TABLE 4-18GVRP and Bridge Extension Commands

Command			Function	Mode	Page
Interface Commands
switchport		gvrp	Enables GVRP for an interface	IC	4-132
switchport			Configures forbidden VLANs for an interface	IC	4-129
forbidden
vlan
show	gvrp		Displays GVRP configuration for selected interface	NE,	4-132
configuration				PE
garp	timer		Sets the GARP timer for the selected function	IC	4-133
show	garp	timer	Shows the GARP timer for the selected function	NE,	4-135
				PE
Global Commands
bridge-ext		gvrp	Enables GVRP globally for the switch	GC	4-135
show	bridge-ext		Shows bridge extension configuration	PE	4-136

Chapter 4 Command-Line Reference 4-131