When specifying interfaces connected to multicast routers through the web interface or CLI, the following parameters are displayed or can be configured:
■All known ports in VLAN connected to multicast routers:
■VLAN – The VLAN on the switch.
(The
■Interface – The interfaces connected to a multicast router and the whether the assignment was static (Static) or dynamic (IGMP).
■Ports in the VLAN statically connected to multicast routers:
■Available Ports – The interfaces that have not been assigned to the selected VLAN as multicast router ports.
■Current Static Ports – The interfaces that have already been assigned to the selected VLAN as multicast router ports.
Web Interface: Specifying Interfaces Connected to Multicast Routers
1.Open Switch Config ⇒ Broadcast & Multicas ⇒ Multicast Router Ports.
2.Select a VLAN.
3.Click Query to display all the interfaces in the VLAN that are connected to multicast routers.
4.From the Available Ports, select an interface that is connected to a multicast router
5.Click Add.
6.From Current Static Ports, select an interface that is no longer connected to a multicast router.
7.Click Remove.
