Example

Console(config)#ip http server

Console(config)#

Related Commands

ip http port (4-31)

4.3.3.6jumbo frame

Use this command to enable support for jumbo frames. Use the no form to disable it.

Syntax

jumbo frame

no jumbo frame

Default Setting

disabled

Command Mode

Global Configuration

Command Usage

The switch provides more efficient throughput for large sequential data transfers by supporting jumbo frames up to 9000 bytes. Compared to standard Ethernet frames that run only up to 1.5 KB, using jumbo frames significantly reduces the per-packet overhead required to process protocol encapsulation fields.

To use jumbo frames, both the source and destination end nodes (such as a computer or server) must support this feature. Also, when the connection is operating at full duplex, all switches in the network between the two end nodes must be able to accept the extended frame size. And for half-duplex connections, all devices in the collision domain would need to support jumbo frames.

Chapter 4 Command-Line Reference 4-33

Page 231
Image 231
Sunfire B1600 manual Jumbo frame