Sunfire B1600 manual Hostname

TABLE 4-6System Management Commands (Continued)

Command		Function	Mode Page
System Status Commands
show	startup-	Displays the contents of the configuration file (stored	PE	4-38
config		in Flash memory) that is used to start up the system
show	running-	Displays the configuration data currently in use	PE	4-40
config
show	system	Displays system information	NE,	4-42
			PE
show	users	Shows all active console and Telnet sessions, including	NE,	4-44
		user name, idle time, and IP address of Telnet clients	PE
show	version	Displays version information for the system	NE,	4-44
			PE

4.3.3.1hostname

Use this command to specify or modify the host name for this device. Use the no form to restore the default host name.

Syntax

hostname name

no hostname

name – The name of this host. The maximum length is 255 characters.

Default Setting

None

Command Mode

Global Configuration

4-28Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003