Sunfire B1600 manual Password

Default Setting

login local

Command Mode

Line Configuration

Command Usage

■There are three authentication modes provided by the switch itself at login:

login selects authentication by a single global password as specified by the password line configuration command. When using this method, the management interface starts in Normal Exec (NE) mode.

login local selects authentication using the user name and password specified by the username command (the default setting). When using this method, the management interface starts in Normal Exec (NE) or Privileged Exec (PE) mode, depending on the user’s privilege level (0 or 15 respectively).

no login selects no authentication. When using this method, the management interface starts in Normal Exec (NE) mode.

■This command controls login authentication through the switch itself. To configure user names and passwords for remote authentication servers, you must use the RADIUS or TACACS software installed on those servers.

Example

Console(config-line)#login local

Console(config-line)#

Related Commands

username (4-29)

password (4-64)

4.3.6.3password

Use this command to specify the password for a line. Use the no form to remove the password.

4-64Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003