Default Setting

None

Command Mode

Privileged Exec

Command Usage

DHCP requires the server to reassign the client’s last address if available.

If the BOOTP or DHCP server is moved to a different domain, the network portion of the address provided to the client is based on this new domain.

Example

In the following example, the device is reassigned the same address.

Console(config)#interface vlan 2 Console(config-if)#ip address dhcp Console(config-if)#exit Console#ip dhcp restart Console#show ip interface

IP interface vlan

IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 2,

and address mode: DHCP. Console#

Related Commands

ip address (4-70)

4.3.7.3ip dhcp client-identifier

You can use this command to specify the DCHP client identifier for the switch. Use the no form to remove this identifier.

Note – The client identifier is overwritten by the SC the next time the system, or the switch itself, is rebooted. The client-identifier command will be removed from the next firmware release.

4-72Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003

Page 270
Image 270
Sunfire B1600 manual Ip dhcp client-identifier