Chapter 4 Command-Line Reference 4-27
Example
Related Commands

dir (4-23)

whichboot (4-25)

4.3.3 System Management Commands

These commands are used to control system logs, passwords, user names, browser

configuration options, and display or configure a variety of other system

information.

Console(config)#boot system config: startup

Console(config)#
TABLE4-6 System Management Commands
Command Function Mode Page
Device Description Command
hostname Specifies or modifies the host name for the device GC 4-28
User Access Commands
enable password Sets a password to control access to the Privileged Exec
level
GC 4-30
WebServer Commands
ip http port Specifiesthe port to be used by the Web browser
interface
GC 4-31
ip http server Allows the switch to be monitored or configured from
a browser
GC 4-32
Jumbo Frame Command
jumbo-frame Enables support for jumbo frames GC 4-33
Event Logging Commands
logging on Controls logging of error messages GC 4-34
logging history Limits syslog messages saved to switch memory based
on severity
GC 4-35
clear logging Clears messages from the logging buffer PE 4-36
show logging Displays the state of logging PE 4-37