Sunfire B1600 manual Detailed Command Description, General Commands, Enable, Syntax

4.3Detailed Command Description

4.3.1General Commands

TABLE 0-2

Command	Function	Mode	Page
enable	Activates privileged mode	NE	4-13
disable	Returns to normal mode from privileged mode	PE	4-14
configure	Activates global configuration mode	PE	4-15
reload	Restarts the system	PE	4-17
end	Returns to Privileged Exec mode	GC,	4-18
		IC,
		LC,
		VC
exit	Returns to the previous configuration mode, or exits	any	4-19
	the CLI
quit	Exits a CLI session	NE,	4-19
		PE
help	Shows how to use help	any	NA
?	Shows options for command completion (context	any	NA
	sensitive)

4.3.1.1enable

Use this command to activate Privileged Exec mode. In privileged mode, additional commands are available, and certain commands display additional information. See “Understanding Command Modes” on page 4-7.

Syntax

enable [level]

level - Privilege level to log in to the device.

The device has two privilege levels: 0: Normal Exec, 15: Privileged Exec. Type level 15 to access Privileged Exec mode.

Chapter 4 Command-Line Reference 4-13